Atlona AT-HDVS-150-TX Switcher 2-HDMI 1-VGA Inputs 1-HDBaseT Output & POE

$uniqueProductID="001025776ATHDVS150TX"; $descriptionAnchors = [{anchor:"general-information",title:"General Information"},{anchor:"resolution",title:"Resolution"},{anchor:"audio",title:"Audio"},{anchor:"distance",title:"Distance"},{anchor:"signal",title:"Signal"},{anchor:"temperature",title:"Temperature"},{anchor:"power",title:"Power"},{anchor:"dimension",title:"Dimension"},{anchor:"weight",title:"Weight"},{anchor:"certification",title:"Certification"}]; Overview Specifications Switcher for HDMI and VGA Inputs with HDBaseT Output The AT-HDVS-150-TX is a 3×1 Switcher for HDMI and VGA Inputs with HDBaseT Output. It features two HDMI inputs plus a VGA input with 3.5mm audio connector. Designed as a remote input device for the AT-UHD-CLSO-824 matrix switcher, the AT-HDVS-150-TX combines the benefits of a switcher with built-in auto-switching and the advantages of long-distance HDBaseT signal extension over a single cable. HDMI signals up to 4K/UHD @ 60Hz with embedded audio, VGA input signals up to 1920×1200 video, and control signals can be extended up to 230 feet (70 meters). The switcher enables auto display on/off, auto-switching, along with other features. The switcher receives power from the AT-UHD-CLSO-824 using Power over Ethernet. The AT-HDVS-150-TX is ideal for long distance transmission and display control in corporate or educational settings using analog and digital sources. Remote Input Extension The Atlona AT-HDVS-150-TX switcher expands the input capabilities of the AT-UHD-CLSO-824. Each remote switcher provides input access for up to three devices with controls for input selection and can control the power state of a display or projector when used with a third party control system. The HDVS series is designed to smooth the transition from analog to digital displays, allowing advanced HDMI display devices to be used with legacy VGA sources. The series also adds the simplicity and performance of HDBaseT technology to eliminate multiple cable runs and signal degradation that can occur with long transmission lines. Cost-effective and easy-to-terminate category cable provides additional integration benefits. The AT-HDVS-150-TX is ideal for professional installation in: Education environments - The switcher is placed on a lectern for use with remote video inputs such as a laptop and document camera. Auto-switching technology selects the active source input and routes the signal via HDBaseT to the switcher downstream. Corporate environments - The switcher is placed at a boardroom conference table to allow presenters to easily connect their laptops to the system. When integrated with a control system, commands can be sent to activate a display from the front panel of the switcher. Features 3×1 HDBaseT switcher Features two HDMI inputs plus a VGA input with 3.5mm audio connector Allows advanced HDMI display devices to be used with legacy VGA sources Long distance HDMI extension Transmits AV signals up to 230 ft (70m) @ 1080P and 130 ft. (40m) @ 4K/UHD using CAT6a/7 cable Uses easy-to-integrate category cable for low-cost, reliable system installation Auto-switching Selects active input when sources are connected or if there is a change in source power status Eliminates need for complex control system in small AV systems Front panel Input Select button Overrides auto-switching when two active sources are present Simple manual control allows presenter to maintain control of AV system Auto display control Automatically changes projector power state based on active or standby mode of scaler. Control signals transmitted via RS-232 Eliminates need for complex control system in small AV systems. Enables display control with AT-UHD-CLSO-824 Front panel Display On/Off control Remotely controls display power state; provides alternate 'Display Mute' mode Eliminates need for manual operation of display or use of IR remote control General Information Manufacturer Atlona Manufacturer Part Number AT-HDVS-150-TX Resolution Video 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i *4096×2160@50/60Hz & 3840×2160@50/60Hz supported @ chroma subsampling 4:2:0 8-bit only VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 Color Space YUV, RGB Chroma Subsampling 4:4:4, 4:2:2, 4:2:0* Color Depth 8-bit, 10-bit, 12-bit Audio Analog IN PCM 2Ch HDMI IN & HDBaseT OUT PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio Sample Rate 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bit Rate up to 24-bit Distance CAT5e/6 @ 4K up to 35 m or 115 ft CAT6a/7 @ 4K up to 40 m or 130 ft CAT5e/6 @ 1080p up to 60 m or 197 ft CAT6a/7 @ 1080p up to 70 m or 230 ft HDMI IN/OUT @ 4K up to 5 m or 15 ft HDMI IN/OUT @ 1080p up to 10 m or 30 ft Signal Bandwidth 10.2 Gbps CEC Yes HDCP 1.4 Temperature Operating 0°C to 50°C/32°F to 122°F Storage -20°C to 60°C/-4°F to 140°F Humidity 20 to 90% non-condensing Power Consumption 18.7W (when paired) Dimension H x W x D 38 x 127 x 102 (mm)/1.5 x 5 x 4.02 (in) Weight Unit 2.34kg/5.16lbs Unit 2.34kg/5.16lbs CE, FCC $currentProdID="001025776ATHDVS150TX";