Long Distance Wireless Remote Control System with 2, 3 or 4-Pole Contactor and Latching Option

Long Distance Industrial Wireless Remote Control System with 2, 3 or 4-Pole Contactor  Series: WCS-CT-900 Features Wireless Bridge Between Switch & Control Panel Activates With Dry-contact Switch, Controller or PLC Up To 6 Mile (LOS) Transmit/Receive Distance Use to Control Pumps, Valves, Motors or Lighting Available with Standard or Latching Contactor Circuit Transmitter Can Be Hardwired, Battery or Solar Powered Pre-wired, Ready To Install and Operate License Free Point-to-point Radio Operation Applications Pump or Motor Control Valve Activation Gate or Lighting Control Description Series WCS-CT-900 Long Distance Wireless Transmitter/Control Panel System provides a wireless bridge between any type dry-contact switch, PLC or Controller and an electro-mechanical contactor. When a switchconnected to the transmitting unit opens or closes signals are sent via a license free radio signal to a receiver unit up to 6 miles (Line-of-site) away. When the control panel receives the proper wireless signal from the transmitter a power contactor inside the panel is energized to operate a pump, valve or motor. Control Panel models feature latching or non-latching versions. Models are available with 2, 3 or 4-Pole Contactors. System Operation Non-latching ModelNon-latching models feature one control line that turns the contactor on and off. latching ModelLatching models feature two control lines. One control line latches the contactor into the on position. The second control line releases the contactor back to the off position. This setup is most often used with two level switches controlling the fill of a tank. General Specifications Radio Frequency: 900 MHzRegulatory: FCC Part 15 (No license required)Control Lines: 1, 2 ,3  or 4Antenna Connection: RP-SMAAntennas: 7dbi, Omni-directional (Included)Transmit/Receive Distance:with included antennas: Indoor/Urban 1000ft, Line-of-site 3 Mileswith optional Yagi antennas: Indoor/Urban 1600ft, Line-of-site 6 MilesTransmitter/Receiver Code Matching: Factory setWire Connection: Terminal BlocksOperating Temperature: -22 to 113 ºF (-30 to 45 ºC)Enclosures: NEMA 4X, PCT Plastic Switch Transmitter SpecificationsRF Power Output: 250mWRF Output Impedance: 50 Ohm nominalRF Data Rate: 250 kbpsOperating Power 12 DC @ 3W max (120V AC with Power Converters)Control Input Type: Dry-contact Switch Contactor Receiver SpecificationsReceive Sensitivity: -110 dBmOperating Power: 12 DC @ 3W max (120V AC with Power Converters)Control Output: 1. 2 or 3-pole Contactor, 40A, 120/240V Max Regulatory ApprovalsFCC(USA) - MCQ-XB900HPIC (Canada) - 1846A-XB900HP Available Base Models  Model No. Description Control Lines WCS-CT-900-1 1-Line Remote Control Transmitter/Receiver Set 1 WCS-CT-900-2L 2-Line Remote Control Transmitter/Receiver Set with Latching Circuit 2 Long Distance Antenna Options  Model No. Description DRWC-900-LRANT Optional 900 MHz Long-Range Directional Antenna (up to 6 Miles line-of-site) Each Transmitter/Receiver Set includes standard antennas, 6ft. antenna extension cables and manual.