Wireless 4-20mA Transmitter / Receiver / Converter Din-rail Set - 2.4 GHz

Wireless 4-20mA Transmitter/Receiver Din-rail Set Model (SKU): WDRXL-24C-420MA Note: The standard antennas included with this model allow for a maximum line-of-site (LOS) distance of 600 ft. For greater distances up to 1 mile you will need the long-distance antenna option. Order optional antenna model DRWC-24-LRANT. Features Provides Wireless Bridge for 4-20mA Loop Signal Receiver/Converter Output Mirrors Transmitter Input Receiver/Converter Provides 4-20mA or 1-5V DC Output Up To 1 Mile Line-of-site Transmit/Receive Distance 12-24V DC Operation Standard Plastic Din-rail Enclosures Pre-configured, Ready-To-Operate Sold As Transmitter/Receiver/Converter Matched Set License Free Radio Operation Applications Process Transmitter Signals Valve Positioning & Control Remote Sensor Monitoring Description The WDRXL-24C-420MA Wireless Analog Transmitter/Receiver/Converter System allows for remotely monitoring or controlling equipment from a distance up to 1 mile away using license free wireless 2.4GHz 802.15.4 communication. Each set features one 4-20mA analog signal input transmitter, one wireless receiver and one 4-20mA output converter module.  General SpecificationsRadio Frequency: ISM 2.4GhzProcess Input Lines: One 4-20mASignal Transmit/Receive Accuracy: +/- 0.5% of rangeOpen Input or Lost Signal Condition: Output Holds Last ReadingReading Update Rate: 250msAntenna Connection: RP-SMAAntennas: 5dbi, Omni-directional (Included)Transmit/Receive Distance:with included antennas: Indoor/Urban 100’, Line-of-site 600’.with optional antennas: Indoor/Urban 300’, Line-of-site 1 Mile.Transmitter/Receiver Code Matching: Factory setWire Connection: Terminal BlocksOperating Temperature: -22 to 113 ºF (-30 to 45 ºC)Enclosures: Plastic Din-rail Transmitter SpecificationsRF Power Output: 79mWRF Output Impedance: 50 Ohm nominalRF Data Rate: 10 kbpsOperating Power 12 - 24V DC @ 3W maxProcess Input: Analog 4-20mA Receiver SpecificationsReceive Sensitivity: -103 dBmOperating Power: 12 - 24V DC @ 3W maxProcess Output: Analog 0-5V DC Analog Signal Converter Module (Included) Model: ACM-5V-420MA-1  Operating Power: 12 - 24V DC @ 3W max Input: 0-5 VDC Output: 4-20mA   Regulatory: FCC Part 15 (No license required) FCC(USA) - MCQ-XBEE3IC (Canada) - 1846A-XBEE3 Basic System Operation WIRELESS 4-20MA INPUT TRANSMITTER The wireless 4-20 mA analog signal transmitter reads analog input data from temperature, pressure, strain, flow, level or RH sensors and then sends the measured data over the air to a remote location. The measured 4-20mA current signals are converted to digital packets and then transmitted via a license free radio transmission to a waiting receiver.   WIRELESS ANALOG OUTPUT RECEIVER The wireless 4-20mA analog receiver decodes any incoming radio packets and converts them into an analog voltage output scaled to match the same 4-20 mA current signal that is being measured by the transmitter in real time.    ANALOG SIGNAL CONVERTER MODULE (Included with Transmitter/Receiver) The analog signal converter accepts the 0-5V DC signal coming from the wireless receiver and converts the voltage back into a 4-20 mA output signal. The converter module is factory calibrated. With your receiver before it is shipped to you. The converter module features both 4mA (Zero) and 20mA (Span) adjustment potentiometers so small adjustments can be made in the field.