Wireless Remote-Control System - Mounts on Industrial Enclosures - 900 MHz - Single Transmitter with 2 or more Control Receivers

Industrial Wireless Remote-Control Set - Mounts on Industrial Enclosures Series: XT-WRC-EM900 (Price includes one transmitter and two or more Control Receivers) Note: This models Receiver has Open-collector outputs. It does not have relays in the receiver. It requires you add your own external relay.  Features Provides Wireless Bridge Between Switches & Relays Activate Transmitter with Any Dry-contact Switch Mounts Directly to Standard Control Enclosures Models Available With 1 or 2 Control Lines Up To 6 Mile Line-of-site Transmit/Receive Distance Receiver Provides Open-collector Output Powered by any 12-14V DC Supply Mounts Externally onto Industrial Enclosures Pre-configured, Ready-To-Operate Sold As Transmitter/Receiver Matched Set License Free Radio Operation Applications Pump or Motor Control Panels Alarm Panels Valve Activation, Gate or Lighting Control DESCRIPTIONThe XT-WRC-EM900 transmitters and receivers are designed for use in various wireless remote-control applications. When triggered with an external dry-contact switch, the switch transmitter will send a digital encoded, FSK modulated signal to its companion control receiver. The receiver will verify the digital code and then activate its open-collector output to drive relays, lights or alarms. Each system is sold as a factory programmed matched set. That means there is no field settings needed to operate right out of the box. Power for the transmitter or receiver can come from any 12-14V DC power supply or battery.  This model is designed to be mounted directly to standard enclosures with a ¾” drilled hole or knockout. 900 MHz General SpecificationsRadio Frequency: 900 MHzRegulatory: FCC Part 15 (No license required)Control Lines: 1, 2Antenna Connection: RP-SMAAntennas: 7dbi, Omni-directional (Included)Transmit/Receive Distance:with included antennas: Line-of-site (LOS) up to 3 Miles.with optional antennas: Line-of-site (LOS) up to 6 Miles.Transmitter/Receiver Code Matching: Factory setWire Connection: 4’ Cable with stripped leadsOperating Temperature: -22 to 113 ºF (-30 to 45 ºC)Enclosures: NEMA 4X, Plastic Switch Transmitter SpecificationsRF Power Output: 250mWRF Output Impedance: 50 Ohm nominalRF Data Rate: 10 kbpsOperating Power 12-24V DC @ 3W maxControl Input Type: Dry-contact Switch Receiver SpecificationsReceive Sensitivity: -110 dBmOperating Power: 12-24V DC @ 3W maxControl Output: Open collector, 24V DC, 100mA Max Available Models XT-WRC-EM900-1-1T-2R Industrial Wireless 1-Line 900 MHz Remote Control Transmitter/with 2 Control Receivers XT-WRC-EM900-2-1T-2R Industrial Wireless 2-Line 900 MHz Remote Control Transmitter/with 2 Control Receivers XT-WRC-EM900-1-1T-3R Industrial Wireless 1-Line 900 MHz Remote Control Transmitter/with 3 Control Receivers XT-WRC-EM900-2-1T-3R Industrial Wireless 1-Line 900 MHz Remote Control Transmitter/with 3 Control Receivers Available Options DRWC-900-LRANT-9 Optional 900 MHz Long-Distance 9dbi Directional Antenna (up to 6 Miles line-of-site)