Extender Kit for Hard Top Plus, Adds containment for 4 additional drums. No Drain. Part #9658

FAQs Resources & Docs Compliance & Regs Additional Info. Frequently Asked Questions Is there access to the drums from both sides of the Ultra-Hard Top Plus Models? Yes, the dual closure system (roll top door and swing out doors) is on both sides of the unit to provide complete access to all drums stored inside. Do the Ultra-Hard Top Plus Models come with a ramp? A ramp is not included, but there is one available as an option (p/n 0676). Are the Ultra-Hard Top Plus Models combustible? Will they burn or melt? The Ultra-Hard Tops are made of polyethylene (LLDPE) so in the event of a fire the units will melt. It is not intended to be used in place of a safety cabinet. Are the Ultra-Hard Top Plus Models waterproof? No, the hard top is not completely waterproof. It is more accurately described as weatherproof. In other words, in standard weather conditions, your drums and/or containers should be protected and water gathering in the pallets is not a concern. However, during very gusty conditions or very heavy rainfall, some water may get into the unit. It is good practice to inspect the interior of the hard top after any severe weather. Can the ramp fit in the Ultra-Hard Top Plus while not in use (with 4 drums in there)? Yes, there is enough room inside of the hard top for four drums and the ramp. What are the inside dimensions of the Ultra-Hard Top Plus Models? At its peak (the top is sloped) the height is 62”, the inside width is 52”, and inside length is 52”. What are extender kits and how do they work? The extender kits are used to expand your current system so that you can store more drums. When you order a kit, you will receive a spill pallet, a black connecting wall, as well as two sets of roll-top doors and swing out doors. Are the containment areas connected in any way? No, unlike some of our products, there are no bulkhead fittings connecting the sumps. Each “compartment” has its own separate, 75-gallon containment capacity. How are the Ultra-Hard Top Plus Models shipped? The Ultra-Hard Top Plus Models ship partially unassembled to save on freight costs. Final assembly will be required upon delivery. More Info / Downloads Product Data Sheet: Hard Top P1 Plus Helps Comply with These Rules & Regulations EPA Container Storage Regulation 40 CFR 264.175 Stormwater Management Regulation 40 CFR 122.26 International Fire Code (IF) 5004.2.3 Additional Product Information Uniform Product Codes (UPCs) UPC 808416096583 Ultra-Hard Top Plus Models Extender Kit, Without Drain (Part #9658) UPC 808416096590 Ultra-Hard Top Plus Models Extender Kit, With Drain (Part #9659) UPC 808416006766 Ultra-Spill Pallet Ramp for P2 Plus, P3 Plus, and P4 Plus (Part #0676)