Zooz 800 Series Z-Wave Long Range Scene Controller Switch ZEN32 800LR

Z-Wave Scene Controller Switch Description On/off Z-Wave and manual control from the main button: use with 120V lights or fans under 3A 4 smart buttons for remote control* NEW 800 chip: more range, faster signal Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range SmartStart inclusion and S2 security to keep your network protected Direct 3-Way Solution: no add-on switch needed, wires just like the ZEN21/ZEN71 model (Neutral required, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying) Great for a regular single pole installation Adjustable LED indicators: choose from different colors and brightness levels Built-in range test tool: troubleshoot your network straight from the device Scene control: trigger up to 35 scenes, control up to 35 devices (available on hubs that support multi-tap triggers*) Smart bulb mode: disable the relay for truly wireless control or use as a remote control / smart add-on switch Compatible with quality LED, CFL, and incandescent bulbs (don't connect to ballast tube lights, switched receptacles, or fans over 3A / 5 years old; NOTE: FEIT bulbs are not recommended) Extra-strong repeater to expand the coverage of your Z-Wave network Use a standard-size wall plate for single gang installations (wall plate not included) 5-year warranty and lifetime tech support NOTE: Z-Wave gateway controller required. *Your smart hub / controller needs to support advanced settings and central scene programming or direct association access for you to take advantage of this feature. Custom Etching You can now order a custom etched faceplate for your Scene Controller from Domotinc! Just click on the image below to customize your plate and order it directly from Domotinc. NOTE: custom etched plates are NOT included with your purchase.  Specifications Z-Wave Frequency: 908.42 MHz (US) Power: 120 VAC, 60 Hz Maximum Loads: 960W Incandescent, 150W LED and CFL bulbs, 1800W (15A) Resistive, 3A fan motors Z-Wave Range: Up to 500 feet line of sight between the Wireless Controller and the closest Z-Wave receiver module Dimensions: 1.16" deep, 1.75" wide, 4.1" tall Operating Temperature: 32-104° F (0-40° C) Installation: Indoor use only WORKS WITH: Z-Box Hub (recommended for Zooz products) Fibaro Home Center Lite Home Assistant (Z-Wave JS) HomeSeer Hubitat (platform version 2.2.6 or higher) Indigo SmartThings Hub (register your product here to access the custom lua driver for full functionality) NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.