5-Port Gigabit Ethernet PoE+ Switch

OverviewSpecificationsMore InformationDownloads Affordable 5-Port Gigabit Power over Ethernet Switch The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch passes both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports — four of which are high-power PoE+ PSE ports — this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds up to 1000 Mbps. Power over Ethernet IEEE 802.3at The Intellinet Network Solutions 5-Port Gigabit Ethernet PoE+ Switch supports the IEEE 802.3at protocol and can inject up to 30 watts of power per port.* IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, which eliminates the time and expense of electrical rewiring and minimizes the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected.   * Total PoE budget for this switch is 40 watts; maximum per-port power usage cannot exceed 30 watts. Provides up to four PoE network devices with power and data PoE power budget of 40 watts 10 Gbps switch fabric / switching capacity 10/100/1000 auto-sensing ports automatically detect optimal network speeds Compatible with IEEE 802.3at/af-compliant powered devices (PD) such as network cameras, wireless access points, VoIP phones and more Power output up to 30 watts per port Short-circuit, overload and high-voltage protection Saves time and money by delivering data and power via existing network cables Auto-sensing PoE awareness to ensure that power is only sent to IEEE 802.3at/af-compliant devices; non-PoE devices only receive data Supports 2k MAC address entries with Auto-Learning and Auto-Aging Supports jumbo frames up to 9 kBytes Buffer memory of 125 kBytes ESD protection up to 8 kV (air) and 6 kV (contact) Mounting holes for wall mounting Store and forward switching architecture Supports IEEE 802.3x flow control on full duplex and backpressure on half duplex Fanless design ideal for silent operation Fully NDAA-compliant Three-year warranty StandardsIEEE 802.3af (Power over Ethernet) IEEE 802.3at (High-Power PoE+ Power over Ethernet) IEEE 802.3 (10Base-T Ethernet) IEEE 802.3u (100Base-TX Fast Ethernet) IEEE 802.3ab (1000Base-T Gigabit Ethernet) IEEE 802.3x (flow control for full-duplex mode)General Ports: five 10/100/1000 Mbps RJ45 Cable: Cat5e/6/6a UTP/STP Duplex modes: all ports (up to 2000 Mbps) Forwarding rate: 7.44 Mpps Buffer memory: 125 KB MAC address table: 2,000 entries Backplane speed / switch fabric: 10 Gbps Switch architecture: store and forward Certifications: FCC Class A, CE, RoHS, UKCA, NDAAPower Input: 100.0 - 240.0 VAC, 50 - 60 Hz; 1.25 A- PoE budget: 40.0 wattsPoE Pinout- Pin 1: DC (+)- Pin 2: DC (+)- Pin 3: DC (-)- Pin 6: DC (-)LEDs Power PoE Link/activityEnvironmental Dimensions (L x W x H): 140 x 77 x 27 mm (5.51 x 3.03 x 1.1 in.) Weight: 344 g (12.1 oz.) Housing: metal Operating temperature: 0 - 40°C (32 - 104°F) Storage temperature: -40 - 70°C (-40 - 158°F) Operating humidity: 10 - 90% RH, non-condensing Storage humidity: 5 - 90% RH, non-condensingPackage Contents 5-Port Gigabit Ethernet PoE+ Switch Power cable Instructions Additional SKUs Amazon ASIN: B09PF9CVYL EAN: 0766623561792 UPC: 766623561792 Physical Specifications Weight: 0.34 kg Dimensions: 140 (L) x 77 (W) x 27 (H) [mm] Datasheet Datasheet     » Download Manual Quick Instruction Guide     » Download Quick Instruction GuideFor Version 2 (after June 2023)     » Download