Fast Ethernet Media Converter
OverviewSpecificationsMore InformationDownloads Fast Ethernet Media ConverterThe INTELLINET NETWORK SOLUTIONS Fast Ethernet Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before – only now it can support both copper and fiber mediums.Expands the Size of an Existing NetworkProvides fiber connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers.Enhances the Distance between Networking DevicesConnecting the converter to fiber segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fiber-based node or networking device.Cabling FlexibilityNetwork managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or used in a wall-mount installation. Several converters can be simultaneously installed into a 19" rack-mountable chassis.Lifetime WarrantyStrict manufacturing standards ensure the highest quality in all INTELLINET NETWORK SOLUTIONS products. All items carry a full Lifetime Warranty – the strongest quality commitment anyone can make. Data transfer rate: 100 Mbps One 10/100Base-TX RJ45 Port, maximum distance 100 m / 300 ft RJ45 port with Auto MDI/MDI-X support and auto-negotiation One 100Base-FX Single-Mode fiber SC duplex port Fiber distance support: up to 30 km / 18.6 mi (9/125 µm cable) Status LEDs for easy monitoring of device status Link Fault Signaling (LFS) Remote and local loop back test DIP switches for multiple configuration options External power adapter Can be used stand-alone or in INTELLINET NETWORK SOLUTIONS converter chassis model 519151 (12 Port) Lifetime Warranty StandardsIEEE 802.3 (Twisted Pair Ethernet) IEEE 802.3u (Twisted Pair / Fiber Optic Fast Ethernet)General Media Support: - 100Base-TX Cat3 or higher UTP/STP RJ45, EIA/TIA 568 - 100Base-FX Single-Mode 9/125 µm fiber Connectors: - One RJ45 port, 100Base-TX - One Fiber SC duplex port, 100Base-FX Distances: - 30 km / 18.6 mi (9/125 µm fiber cable) - 100 m / 300 ft (RJ45 cable) Wavelength: 1310 nm Min. TX power: -15 dBm Max. TX power: -8 dBm RX sensitivity: -34 dBm Min. power budget: 19 dB Max. power budget: 26 dB Certifications: FCC Class A, CE MarkLEDs COL: flashes amber to indicate data collision FDX: green indicates full duplex mode ACT: flashes green to indicate data traffic LNK: green indicates receiving link pulses from compliant device LFS: illuminated red when a break or disruption exists in copper or fiber links 100: illuminated green when data packets are being transmitted at 100MbpsDip Switches: DIP 1 - Enables / disables auto-negotiation DIP 2 - Copper port (RJ45) duplex mode; full-duplex or half-duplex DIP 3 - Copper port (RJ45) data bit rate; 10Mbps or 100Mbps DIP 4 - Fiber port duplex mode; full-duplex or half-duplex DIP 5 - Enables / disables link fault signaling (LFS) DIP 6 - Enables / disables local loop back (LLBK) DIP 7 - Enables / disables remote loop back (RLBK)Power External power adapter, 12 V DC, 0.5 AEnvironmental Metal housing Dimensions: 133(L) x 86(W) x 29(H) mm (5.23 x 3.4 x 1.1 in.) Weight: 158 g (0.34 lbs.) Operating temperature: 0° to 50°C (32° to 122°F) Operating humidity: 10% to 80% RH, Non-condensing Storage temperature: -20° to 70°C (-4° to 158°F)Package contents Fast Ethernet Media Converter External power adapter User manual Additional SKUs EAN: 0766623515344 UPC: 766623515344 Physical Specifications Weight: 0.95 kg Datasheet Datasheet (English) » Download