LogBox-DA - Data Logger with One Analog and One Counter/Frequency Input Channels

Two Input Channels: One Accepts  NPN, PNP, Pulse or Dry Contact the other Accepts 0-20 mA, 4-20 mA, 0-50 mV and 0-10 Vdc Easily Programmed via a Handy Infrared IRLink3 Interface Connected to a USB Port under Windows® Software IP65(Dust Tight)/ IP67 (Water Tight) Enclosures Launch Options: Immediate, Programmed Time and Date Stop Options: When Full, at a Certain Time, After a Number of Readings, or Wrap Around (Overwrites First Readings) Memory for 32,000 Recordings in One Channel or 16,000 Recordings for each Channel Infrared Communication Up to 1 Meter Away Recording Interval: Programmable From 1 Sec to 18 Hours Built in Real Time Clock Internal Replaceable Lithium Cell (3.6V 1/2 AA) Estimated Battery Life: 200 Days with One Weekly Download and 5 Minutes Measuring Interval. Battery Life Depends Heavily on Data Retrieval Frequency. LogBox-DA is an electronic data logger with two input channels, one analog and one digital. The digital input can be configured for for counting or frequency measurement. Input data is stored in the logger internal memory for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets. Dual Input ChannelsThe LogBoxA features two input channels, one analog (0-20 mA, 4-20 mA, 0-50 mV and 0-10 Vdc) and one digital (NPN, PNP, Pulse and Dry Contact). Configuration and Visualization SoftwareThe LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software. Power SavingThe LogBox-DA provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.[to_order_table]  To Order  click on the model below (or scroll to the top of the page and select the model from the drop down box) then ADD TO CART button  PART NUMBERS DESCRIPTION LOGBOX-DA-IP65 LogBox-DA with IP65 Enclosure LOGBOX-DA-IP67 LogBox-DA with IP67 Enclosure Accessories IRLink3  USB Infrared Interface for Data Logger to LogChart Software  [to_order_table]  Downloads LogBox-DA Datasheet LogBox-DA User Manual   SPECIFICATIONS Input Channel 1:NPN, PNP, Pulse or Dry ContactLevel 0: 0.0 up to 1.0 VoltsLevel 1: 2.0 up to 24.0 VoltsMax. frequency: 4000 Hz for NPN, PNP and Pulse 20 Hz for dry-contact (internal De-bounce) Input Impedance: NPN, PNP and Pulse: 105 kΩ Dry contact: Capacitance of 100 nF Maximum counting: 65535 per period. Input Channel 2:0-20 mA, 4-20 mA, 0-50 mV and 0-10 Vdc, internally selectableInput 2 resolution: 14 bits or 16.384 levelsInput 2 accuracy: 0.2% of range input signalInput Impedance:0-20 mA and 4-20 mA: 120 Ω0-50 mV: >>10 MΩ0-10 Vdc: >120 kΩMemory capacity: 64000 (64k) Interval between readings: minimum - 1 second, maximum - 18 hours External battery switch time: 0 to 10 s Power: 3.6 V lithium battery (1/2 AA) Estimated autonomy: 200 days with one weekly download and 5 minutes measuring interval. Battery life depends heavily on data retrieval frequency. Working temperature: From –40°C to 70°C Protection: IP65 and IP67 models (see lateral label on product) Material: ABC + PC case, Polycarbonate film Dimensions: 60 x 70 x 35 mm Weight: .25lbs