PyroCube XS Focused Optics for Measuring Extremely Small Targets

Temperature Ranges from 50°C to 500°C Measured Spot as Small as 0.7 mm Response Time as Fast as 10 ms Continuous LED Sighting Shows the Position and Size of the Measured Spot while Readings are being Taken Multilingual Touch Screen Interface (optional: contact IOThrifty for details) The PyroCube is a family of non-contact infrared temperature sensors with built-in LED sighting. They have an extremely fast response time, and can precisely measure the temperature of a very small area. The continuous LED sighting illuminates the position and size of the measurement spot while readings are being taken, without affecting the accuracy of the measurement. The sensor works by detecting the infrared radiation emitted from a surface as a result of its own temperature. The amount of radiation emitted is measured by the PyroCube and converted to an accurate temperature measurement.Two base models of the PyroCube are available.  One has a spot size of 0.7mm at a distance of 40mm from the target, the other a spot size of 1mm at 100mm from the target. Both models are available with or without a touch screen interface.Applications for the PyroCubeXS include measuring individual electronic component temperatures on a circuit board, and plastic welding where the seam is very narrow. Optional PM030 Touch Screen Interface ModuleThe PM030 is an optional multilingual touch screen interface module for the PyroCube sensor. The PyroCube can be used with or without the optional PM030. It functions as a standalone temperature indicator, alarm unit and configuration tool, and a selectable analog output allows it to be connected to further instrumentation. All the settings of the PyroCube sensor are adjustable via the built-in touch screen interface. When an optional MicroSD Card is inserted into the PM030, the system functions as a fully-configurable temperature data logger. OrderingSelect from the drop down boxes on the top of the page1) Field of View - choose from    0.7mm spot diameter for XSA models (0.7mm spot size at 40mm from target)    1 mm spot diameter for XSB models (1mm spot size at 100mm from target)2) Cable Length    2 Meters    5 Meters    10 Meters3) Voltage Output   0-1Vdc   0-5Vdc   0-10VdcNote: All models also have 0-20mA, 4-20mA and mv/°C outputs as standard.  If voltage output is not required, choose 0-1Vdc    Downloads PyroCube XS Datasheet PyroCube XS User Manual   Measurement Specifications Temperature Range  XSA models: 50°C to 500°C  XSB models: 100°C to 500°CMeasurements at lower temperatures are possible with reduced stabilityAnalog Output Scale (Factory default)4 mA = 0°C20 mA = 500°CAdjustable via optional touch screen module or RS232 Response Time (95%): XSA models: 10 ms, XSB models: 50 ms  Adjustable up to 5 s via averaging functionMeasured Spot Diameter: From 0.7 mm depending on model and measurement distance (see Field of View Diagrams below)Target Sighting: Red LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/offAccuracy of Measurement: XSA models: ± 3°C or 1%, whichever is greater, XSB models: ± 5°CRepeatability: XSA models: ± 1°C, XSB models: ± 2°CTemperature Resolution:  XSA models: 0.5°C, XSB models: 1.5°CEmissivity Setting:  Adjustable, 0.3 to 1.0, via RS232C or optional touch screen interfaceSpectral Response: 5 -7 µmPM030 SpecificationsTouch Screen Display Format: 2.83" (72 mm) resistive touch TFT, 320 x 240 pixels, backlitConfigurable Parameters:Language (English, Chinese, Japanese)Temperature units: °C/°FDisplayed temperatureLED sighting on/offPasswordDate & time (for data logging time stamps)Peak hold period, decay levelAveraging periodCorrection (gain/offset)Emissivity setting (with teach function)Reflected energy compensation (with teach function)Output typeOutput temperature rangePolarity on errorAlarm mode, levels, hysteresisPM030 Data Logging SpecificationsStorage: MicroSD Card (optional), max. 32 GB, equal to 16 years of data at the fastest sample rate of 1 per secondData Logging Interval: 1 second to 1 day (configurable)Internal Clock Battery: 1 x BR 1225 3V (not included)Variables Logged: Instantaneous target temperature, hold temperature, alarm eventsFile format: .csvConfigurable Parameters (Data Logging):Sample periodNumber of samplesScheduled startConfigurable Parameters (Alarm Logging):Log times when triggered, acknowledged, resetLog data while triggeredElectrical Specifications:Outputs: 1 analog output and 1 alarm outputAnalog Output: 4-20 mA (this is the default factory setting on all models)Output type can be changed via optional PM030 touch screen interface to a choice of:0-20 mAmV/°CVoltage (range depends on model, see Ordering)Alarm Output: 1 open drain alarm output, rated 27 V DC, 0.2 ASupply Voltage: 5 to 27 V DC, 100 mA maxDigital Communications: RS232C Modbus RTU, non-isolatedOutput Cable Connection to Sensor:  XSA models: Connector built into sensor XSB models: HardwiredMechanical SpecificationsWeight (without cable) : XSA models: 200 g, XSB models: 85 gEnvironmental Specifications (PyroCube Sensor)Environmental Rating: IP67Operating Ambient Temperature: 0°C to 50°CStorage Temperature: -15°C to 70°COperating Ambient Humidity: 30% to 85% RH non-condensingField of View DiagramsThe given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Accuracy specifications are valid up to the maximum distances shown.