HIGH POWER® HPA-601250U3 REV: C0-A42 60W Energy-efficient Fanless AC to 12V Power Adapter

Input: 100-240 VAC +/- 10% full range Input AC Inlet: IEC 320 3pin (Type C14) compatible with standard 3-prong computer power cord. Output Voltage: 12V DC Ratings: 5A (60W) Idle no load power consumption is less than 0.5 Watt CEC Level IV High efficiency switching technology with 83% efficency DC Cable length - 47.5" (120cm) DC Jack Type: 6-pin High efficiency switching technology with 83% efficency at full load Fanless AC adapter operates in total silence.  Ideal power source for devices such as DVR, LCD monitor, etc. Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE,  FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK Applications: Security device such as LCD monitor, CCD camera, security system, and control. Specifications: Universal input 100-240 VAC High efficiency switching technology -- 83% typical @ full load Single 12V output @ 5A  +- 5% Load Regulation: +- 5% (11.4V - 12.6V) DC Cable length - 47.5" (120cm) with UL rated 1185 AWG#18 cable Over Current protection Over Voltage protection Short circuit protection Open-Circuit Protection 100% HI-POT tested 100% cycling BURN-IN Dimensions: 120 mm (L) * 60 mm (W) * 35mm (H) Storage Environment: Temperature:  -20 - 85 degree C Humidity: 5 - 90 % Altitude: From sea level to 40,000Ft Operating Environment: Temperature:  0 - 40 degree C Humidity: 10 - 90 % Altitude: From sea level to 10,000Ft MTBF : > 30,000 hours at 80% load and 40 degree C ambient conditions Input Fuse Rating: T3.15A/250V Inrush Current at cold start, maximum load:   30A at 110 VAC  60A at 220 VAC Line Regulation: This line regulation is less than ± 1%, @ full load . Turn-ON Time: The output voltage should rise to 90% of +12V in less than 3 seconds from AC apply to 110VAC No load power consumption is less than 0.5 Watt @ 230VAC/ 50Hz DC Output Ripple/Noise: 2% max Hi-Pot Tested: 4242 VDC at 5mA for 3 second between primary and secondary circuit Insulation Tested: 500VDC for 3 seconds between primary and secondary circuit Worldwide EMI & SAFETY APPROVAL: UL/cUL , TUV/GS, CE,  FCC, CCC, BSMI, DOIR +C-TICK, GOST-R, PSE, PSB, EK Built-in power status indicator Green LED turns steady on when there is a reliable 12V DC output. LED flashes when there is a problem found by the internal detection circuitry. LED turns off when there is no power output or no power input.