HIGH POWER®600W Modular Active PFC PC Power Supply *OPEN BOX*

HIGH POWER®600W Modular Active PFC PC Power Supply *OPEN BOX*

$59.99

HIGH POWER® HP-600-MOD is one of the highest quality modular-cable 600-watt power supply units you can buy for your gaming computer, media PC, or high end workstation. It is highly efficient and thus operates in low heat and without the need to spin up the cooling fan just to cool itself down.HIGH POWER® engineers designed this high efficiency unit with a Smart Fan controller to dynamically control the fan speed. The result is a power supply that not only dissipate little heat, but operates in extreme low noise. HP-600-MOD is designed to meet 80Plus® efficiency standard to achieve at least 82% efficiency across all load range.   Standard ATX size to fit in standard tower cases, gaming cases, and most name brand systemsDimensions: 150(W) x 85(H) x 140(D) mm Features: Active PFC technology for greater energy efficiency EuP Lot 6 2013 compliant Consumes less than 0.5W in standby no load state Worldwide application with automatic AC input selection True-Wattage Rated 600-watt continuous Single +12V rail with 540-watt output capacity Minimum 82% efficient across 20%, 50%, and 100% load range under 115V AC Supports Intel Core i3, i5, i7, 64-bit Pentium D, Core 2 Quad, Core 2 Duo, Core 2 Extreme, and AMD 64 X2, FX-6300, FX-83XX, A10, A6, Ryzen based systems. Ultra low noise performance without the high cost of fanless model Honey-comb rear vent structure for improved ventilation Complete 4*Startm system protection with built-in: Over Voltage Protection, Under Voltage Protection, Short Circuit Protection, Over Power Protection RoHS Compliant - made with lead-free and hazardous-free components Right-Angle Serial-ATA connector for extra short clearance application Rocker switch for manual shut-down High standard of quality with FCC, CE, TUV, and TUVus certification   Connectors Summary:1x 20+4pin ATX Main Connector (sleeved) - 19"1x CPU 4+4pin EPS12V Power Connector - 24"3x Molex Peripheral Power Connectors6x SATA Power Connectors2x PCI-Express 6+2pin Power Connector1x Floppy Power Connector   Ultra Low NoiseFanless-quiet with high tech low heat design sufficiently cooled by a low-RPM 120mm fan. Fan speed is thermostatically controlled.High EfficiencyRegardless of your system load, this unit is designed to be efficient regardless. It is designed to be at least 82% efficient whether the system is under low, nominal, or high load.EuP Lot 6 2013 compliantThis unit is designed to consumes less than 0.5 watt in standby no load state. You no longer suffer noticeable power loss even after PC system is powered off.Right angle (90-degree) serial ATA power connectors spread out in multiple lines of cables to reach various drive positions in tight cornerRoHS Compliant - made with hazardous-free componentsRoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.Lead-FREE Cadium-FREE Mercury-FREE Hexavalent Chromium-FREE PBB-FREE PBDE Flame Retardants-FREE   Performance and Low Noise Upgrade forDell XPS 8300 8500 8700 8900 x8900Dell P/N: D460AM-02/DPS-460DB-10ADell Precision T3500 WorkstationDell 525W PSU P/N: 0G05V 0M821J H525EF-00 D525AF-00 H525AF-00 D525E001L   Advantages Over the Original Dell OEM Power Supply: Higher Efficiency - Low heat and Energy-Efficient: typical 84%, average 82% efficiency Lower Standby Power Consumption - Less than 1-watt, EuP 2010 Lot 6 Compliant Higher Maximum Output Capacity - 600-Watt, even under continuous 24/7 heavy load Modular Cable Design - Plug in only power connectors needed to reduce the bulk of cables inside the system blocking crucial air flow. Stronger +12V Output Rails - Ensure safe and stable system operation under heavy load, particularly when a PCIe graphic card is installed.   TECHNICAL SPECIFICATION Efficiency & Fan Speed Table LOAD No load 10% 20.00% 30.00% 40.00% 50.00% 60.00% 70.00% 80.00% 90.00% 100.00% RPM 820 825 830 835 855 880 990 1180 1310 1470 1580 AC 230V Efficiency - 84.35% 87.31% 88.36% 88.82% 88.34% 87.95% 87.41% 86.79% 85.79% 85.22% AC 115V Efficiency - 82.76% 86.12% 87.29% 87.32% 86.62% 86.02% 85.34% 83.86% 83.26% 82.58%   AC INPUT 100~240Vac - 60/50Hz DC OUTPUT +3.3V +5V +12V -12V +5VSB 600W MaxCombinedWatts 20A 20A 45A 0.3A 2.5A 600W +5V & 3.3V combined output maximum is 120W Inrush current regulation: 100A @ 230Vrms (at 25℃ ambient cold start).            

Show More Show Less