Axial AXI03006T2 SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler (Red)
Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler (Red) w/Portals & DX3 2.4GHz RadioFeatures: Replica V8 engine cover, transmission housing and transfer case cover and protect the motor while improving scale appearance and adding forward-mounted weight. DIG function transmission option lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Two-speed transmission option (some assembly required) allows you to increase vehicle speed by approximately 40%. Drivers can choose between the DIG and 2-speed transmission options, or run both with a 4-channel transmitter and two servos (not included). AR45 Portal Axles feature an offset front housing for realistic looks. Axle housings also use portal gears for increased ground clearance and a universal that provides 45 degrees of steering. Differential locker features Hypoid gears, allowing for smaller size gears, improved gear reduction and reduced torque twist. Authentic Jeep® JT Gladiator body includes over 20 injection-molded parts including bed rack, door handles, mirrors, hood vents and more. Three-piece body provides a more realistic deep bed. New centered battery position improves chassis balance with front-mounted motor. Chassis side pods offer mounting locations for smaller LiPo batteries, if desired. Hard anodized oil-filled shocks feature shock cap with bleed screw for easier rebuilds. All drive train components in the transmission, portals and axle gears are metal for extreme durability — with pinion gear included, the vehicle has 23 metal gears in total. Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most "slop". Metal stainless steel pivot balls at all suspension points increase durability and wear life for consistent handling. Improved suspension geometry further reduces torque twist while allowing chassis fine-tuning. Extended 13.9 inch wheelbase with longer frame rails and chassis supports a more realistic version of the Jeep® JT Gladiator body. Detailed interior with molded driver adds to the vehicle's realistic scale looks. New rear body mounts simplify body removal. Injection-molded inner fenders hide internal components usually visible from the side of the chassis. Spektrum™ DX3™ DSMR® radio is fully compatible with the Smart telemetry potential of the installed Firma™ Smart 40A ESC/receiver. Included Spektrum™ 15kg metal gear servo and all electronics are protected by a waterproof design for confident driving in any weather and trail conditions. Specifications:Approximate Assembly Time: No assembly requiredBall Bearings: Full setBattery: Sold SeparatelyBody: 3-piece, highly detailed LexanBrakes: Integral with ESCBushing Material: MetalCharger: Sold SeparatelyChassis: Adjustable steel C-channelCompletion Level: Ready-To-RunDifferential: LockedDrivetrain: 4WDDrive Type: Forward/Brake/ReverseFinal Drive Ratio: 45.6:1 Low / 31.3:1 HighFront Track: 8.9 in (226mm)Power Type: ElectricGear Pitch: 32Ground Clearance: 3 in (76.2mm)Max Battery Dimensions: 5.45 x 1.83 x 1.38" (138.5 x 46.5 x 35mm)Motor Type: BrushedPinion: 14TProduct Height: 9.5" (241 mm)Product Length: 22.25" (565 mm)Product Weight: 7lbs (3175g)Product Width: 9.25" (235 mm)Radio: IncludedRear Track: 8.9 in 226mm)Receiver: IncludedScale: 1/10Servos: IncludedShock Type: Oil-filledSpeed Control: IncludedSpur Gear: 40TSuspension: Multi-link solid axle with stainless steel pivot ballsTechnology: SmartVehicle Type: Rock CrawlerWater-Resistant: YesWheelbase: AdjustableIncludes: (1) Axial® SCX10™ III Jeep® JT Gladiator 4WD (1) Spektrum Firma™ Smart 40A ESC/Receiver (installed) (1) Spektrum 15kg Servo (installed) (1) Spektrum™ DX3™ DSMR® Radio (1) Product Manual Needed to Complete: Vehicle Battery (accepts standard and shorty packs) Compatible charger LiPo Safety Container