Hit Box Modification Jig

Do you have an old Hit Box arcade case that lacks a proper USB passthrough, has an out dated PCB, and the 4th button for Touch Pad Click? Did you know the thin metal used in the case is very easy to drill with a step bit? With this jig you can get your extra 24mm button perfectly aligned and add mounts for a Neutrik USB passthrough with a clean perfectly aligned set of holes.  The jig is laser cut on demand from 1.5mm acrylic. It may be clear, white, black, red, or whatever acrylic I have available that is the right size. To use: Remove the bottom panel of the Hit Box controller. Remove the PCB from the controller to ensure metal shavings do not cause shorts during drilling and subsequent use. Remove the stock USB cable and the 3x 24 mm buttons. Cover the metal front with painters tape. Place the drill guide over the three stock holes and reinstall the buttons to hold the jig in place. Use a small 3mm drill bit (slightly smaller than a 1/8") to drill the 4 guide holes in the jig. Remo