CNC Fabrication 7.3L Replacement HPOP lines

CNC Fab Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication upgrade! Advanced HPOP lines featuring top-of-the-line Aeroquip® hoses with DuPont Teflon™ lining. Burst pressure rating of 16,000psi and working temperature rating of 400*FNominal working pressure is 5000psi @ 72*F and 3000psi @ 400*F If your engine oil is this hot you have bigger issues to worry about. Kit comes with all necessary fittings MADE IN THE USA Installation: Disconnect the battery grounds before installation to avoid accidentally arc'ing the line on the glow plug relay or the alternator charging lug. Use the pictures on this page for reference. The lines are marked "PA" for passenger head and "DR" for driver head. After installation, be sure there is no other lines/wires that are touching the lines that could potentially rub through and damage either the hpop line or the other line that may be touching it. Use a small section of wire loom protector or a