U-Reach SP101 1:1 Standalone M.2 NVMe/SATA Duplicator and Eraser for NVME & SATA devices, transfer speed of 9GB/min

SP101 1 to 1 M.2 SATA/NVME Dual-Interface SSD Duplicator & Data Eraser   Key Features Four copy modes including Quick (Systems & Files,) Whole Media, All Partitions, Percentage % Copy 7 erase modes including Quick erase, Full erase, DoD erase, DoD erase comp, 7-pass erase, Secure erase, Enhanced Secure erase Transfer speed up to 9GB/min Cross-interface data copy between NVMe and SATA device*. Supports M key and B+M key for all M.2 PCIe, M.2 SATA devices, SATA HDD/SSD devices and IDE devices (required adapters).   *Copy OS drive with limited conditions Overview U-Reach SP101 is a professional NVMe M.2 SSD and SATA duplicator. Native support NVMe and SATA protocols enables cross-signal and cross-interface duplication for your data. Standalone design no need to connect with the computer. Four modes of drive duplication including Data Only (Quick COPY), Whole Media, All Partitions, Percentage Copy. Transfer speed is up to 9GB per minute. SP101 is not only a duplicator, but also an eraser. It is capable of erasing 2 drives simultaneously with multiple erase modes including Quick erase, NIST Full erase, DoD erase, DoD erase comp,  7-pass erase, Secure erase, Enhanced Secure erase. It helps your data backup and data wiping process. Applicable for all M.2 PCIe, M.2 SATA devices, SATA HDD/SSD devices and IDE devices (required adapters). It also support hot swapping. Specific modular-designed M.2 ports effectively reduce downtime and is cost-effective for long-term ownership. For added compatibility with different drive types in duplication and quick erase applications, the SP151 supports the use of various drive adapters. The below list of JetMedia adapters have been specifically tested, to ensure compatibility with this NVME/SATA cloner: 2.5inch IDE drives - 25H-IDE3.5inch IDE drives - 35H-IDE mSATA drives - MS-SD100 The durable and portable design will be your best tool for your data management. Application It helps IT professionals and system administrators to manage drives effectively. Standalone and portable design requires no PC or additional software for data duplication or erase. Data backup tool for repair workshop, office professionals, medical staff, government personnel. Cross-interface data copy between NVMe and SATA device. ( copy OS with limited conditions) 1-to-1 copy or erase up to 2 NVMe/SATA devices simultaneously without a host computer.   SP101 1 to 1 M.2 SATA/NVME Dual-Interface SSD Duplicator & Data Eraser Hot-Swap Duplication Resolves PC-Based Pain Points without Having to Reboot the Device         Cross-Interface Design for Duplication         Speed Boost on Your Gaming Computer The Dual-Interface Design Helps Back Up Your Data to NVMe SSD and Boost the Speed     Data Transfer from PCIe to SATA Automatically with the Intellectual Dual-Signal Detection       Data Transfer from SATA to PCIe Automatically with the Intellectual Dual-Signal Detection       U Native Signal Directly Use NVMe Signals for Duplication without Transfering Errors from USB3.0 Signals   SP101 Supports Multiple Drives of Different Brands and Capacities     Encrypted Data Duplication SP101 Copies Multiple Software Encrypted Data     PCIe + SATA 2 Interfaces on 1 Duplicator SP101 Can Copy Data of Both PCIe and SATA Devices Portable & Compact     SPECIFICATIONS Model SP101 Target 1 to 1 Specifications Max speed (GB/ min) 9GB/min.*Actual performance is dependent on HDD transfer speeds* Capacity Supports the latest market available capacity Designed support capability up-to 18TB+ Operating Type Stand-alone, FPGA-based operation (Non PC-based) Supported Languages English, Japanese LCD Display Backlit Monochrome LCD Display LEDs 3 LED Indicators per Port: Yellow (Power), Green (Pass), and Red (Fail) Control Panel 4 Push Buttons(▲, ▼, OK, ESC) Features Copy Quick Copy (Systems & Files Copy), All Partition Copy, Whole Device Copy, Percentage Copy Compare Bit by Bit data comparison Erase Quick Erase, Full Erase (NIST 800-88), and DoD Erase Compatibilities Compatible Devices NGFF (M.2): 2230, 2242, 2260, 2280, PCI-e SSD (full and low profiles) Compatible Devices (with required adapter) SATA HDD/SSD, U.2(SFF8639) 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR, M.2(NGFF), Cfast, SATA DOM. Supported O/S All (Windows, Mac, Linux, and other stand-alone systems) Supported Formats Quick Copy: FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+,HFSX) Whole Device Copy: All Formats, including proprietary formats Hardware Specifications Temperature range Working temperature: 5°C ~ 45°C Storage temperature: -20°C ~85°C Humidity range Working humidity: 20% ~ 95% Storage humidity: 5% ~ 95% Dimension 11.5 in. x 9 in. x 3 in. Weight 3.6 lbs. Power 60W (12V 5A) Power Supply Universal Power: 115VAC or 230VAC, 50/60Hz Certification FCC, CE, RoHS VIDEO COMPARISON CHARTS