Mark-10 EasyMESUR Test Frame-Series F: 750, 1500 lbF

Maximize Your Testing Power with Series F Test Frames + EasyMESUR® Perform a full range of tension and compression tests—break, cycling, limit testing, load holding, average force, and more—right from the built-in EasyMESUR® touchscreen.  Set up and run tests, export results, and create reports via the integrated, easy-to-use touchscreen interface. EasyMESUR® force testers measure and analyze data with available graphing and reporting capabilities. Keep costs low by adding only the features you need. Optional functions like distance measurement, graphing, and cycling can be unlocked at purchase or later via activation codes—so you’re never paying for more than you use. Purchase functions and packages at time of order or enable them in the field via activation codes. All testers are shipped in a 160-hour evaluation mode, in which all functions are available. Effortless sample setup with optional FollowMe® positioning—just guide the crosshead by hand. Engineered for Versatility, accommodate a wide range of sample sizes with generous travel, clearance, and depth. Modular designs support both single- and double-column extensions for oversized specimens, with vertical or horizontal orientations available. Choose from a full range of force sensor capacities and grips and fixtures to build your perfect system. Looking for higher force capacities? Explore our 100 lbf, 300 lbf and 500 lbf models—part of the same trusted Series F EasyMESUR line. Why buy from JLW Instruments?We do more than sell—we calibrate, install, train, and support. Get expert advice, precision setup, and responsive service from a trusted partner in force measurement. Specifications F755-EM F755S-EM F1505-EM F1505S-EM Load capacity*: 750 lbF[3.4 kN] 1,500 lbF[6.7 kN] Maximum travel: 32.0 in[813 mm] 14.2 in[360 mm] 32 in[813 mm] 14.2 in[360 mm] Standard speed range: 0.5 - 24 in/min[10 - 600 mm/min] Optional speed range: 0.001 - 60 in/min[0.02 - 1,525 mm/min] 0.001 - 70 in/min[0.02 - 1,800 mm/min] Load accuracy(% of full scale) Test frame: ±0.1%Force sensor: Series FS05: ±0.1% | Series R07: ±0.15% Load sampling rate: 5,000 Hz Data acquisition rate: 100 Hz Speed accuracy: ±0.2% of setting, virtually no variation with load Position accuracy: ±0.006 in [0.15 mm], at any load or position Distance resolution: 0.001 in [0.02 mm] Limit switch repeatability: ±0.001 in [0.03 mm] Power: Universal input 100-240 VAC, 50/60 Hz, 300W Universal input 100-240 VAC, 50/60 Hz, 450W Fuse type: 4A, 3AG, SLO BLO Weight (test frame only): 184 lb[83 kg] 149 lb[68 kg] 197 lb[89 kg] 157 lb[71 kg] Shipping weight: 235 lb[107 kg] 195 lb[88 kg] 247 lb[112 kg] 205 lb[93 kg] Environmental conditions: Indoor use onlyUp to 6,500 ft [2,000 m] above sea levelTemperature range: 40 - 95°F [5 - 35°C]Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingMains supply voltage fluctuations up to ±10 % of the nominal voltageTransient overvoltages up to the levels of Overvoltage Category IIUse in environments up to Pollution Degree 2 Conformance: CE, UKCA Warranty: 3 years [see individual statement for further details] * Load capacity is reduced at higher speeds, as follows:- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min