Mark-10 Series F IntelliMESUR Advanced Motorized Test Stands (100, 300 & 500 lbF)

Engineered for Precision. Built for Versatility. The Series F family of force testers delivers exceptional performance in both tension and compression testing, with robust capacities up to 500 lbF (2.2 kN). Whether you prefer a vertical or horizontal setup, these testers can be adapted seamlessly to your needs, offering a wide range of interchangeable force sensors, grips, and fixtures to handle virtually any testing requirement. Effortlessly set up, run, and analyze tests with IntelliMESUR® software, from simple routines to complex, multi-step sequences, IntelliMESUR® empowers users with intuitive control—choose a tablet control panel or run it on your own Windows device. Take your material analysis further with the optional Materials Testing Calculations Module, unlocking key insights with automated calculations such as tensile strength, Young’s modulus, yield point, and more—all at your fingertips. Need Coefficient of Friction (COF) measurements? An optional module makes it easy to expand your capabilities. From R&D labs to production floors, the Series F testers are your complete solution for force measurement. Looking for higher force capacities? Explore our 750 lbf and 1500 lbf models—part of the same trusted Series F IntelliMESUR line. Why buy from JLW Instruments? We do more than sell—we calibrate, install, train, and support. Get expert advice, precision setup, and responsive service from a trusted partner in force measurement. Contact us to learn more about Mark-10 motorized test stands Features Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position. Deflection compensation utility can be used to compensate for deflection within the grips and attachments. The deflection offset file can be associated with the test setup file. Collects load and travel data at up to 1,000 Hz, and allows up to 4 million data points per run. Save or export data automatically or manually. Save individual runs and results to a USB drive or file location of your choice.  Manual control can be used tor running a quick test without having to create a test profile. Control user access with three different permission levels. Specifications   F105 F305 F505 F505H Load capacity*: 100 lbF[0.5 kN] 300 lbF[1.5 kN] 500 lbF[2.2 kN] Maximum travel: 18.0 in[457 mm] Speed range: 0.02 – 45 in/min[0.5 – 1,100 mm/min] Load accuracy(% of full scale) Test frame: ±0.1%Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% Load sampling rate: 20,000 Hz Data acquisition rate: 1,000 Hz Speed accuracy: ±0.2% of setting, virtually no variation with load Distance accuracy: ±0.002 in [0.05 mm], factory-compensated at up to full load Distance resolution: 0.0005 in [0.01 mm] Limit switch repeatability: ±0.001 in [0.03 mm] Power: Universal input 100-240 VAC, 50/60 Hz, 300W Fuse type: 1.2 A, 250V, 3AG, SLO BLO Weight (test frame only): 60 lb[27 kg] 70 lb[32 kg] Shipping weight: 75 lb[34 kg] 85 lb[39 kg] Environmental conditions: Indoor use onlyUp to 6,500 ft [2,000 m] above sea levelTemperature range: 40 – 95°F [5 – 35°C]Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensingMains supply voltage fluctuations up to ±10 % of the nominal voltageTransient overvoltages up to the levels of Overvoltage Category IIUse in environments up to Pollution Degree 2 Conformance: CE Warranty: 3 years [see individual statement for further details]  * Load capacity is reduced at higher speeds, as follows:– F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min– F505 / F505H: limited to 300 lbF [1.5 kN] above 24 in [610 mm]/min