Series R51 Torque Sensor (MR51)

The Mark-10 MR51 Torque Sensor measure bi-directional torque for a wide variety of applications. Contains a chuck for samples up to 1/2" (12.7 mm) in diameter, depending on capacity. The sensor can be used as a hand held device, or mounted to a torque test stand. Capacities available from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). Accuracy: +/-0.35% of full scale + indicator Interfaces with 7i, 5i, and 3i indicators Capacity x Resolution with Models 5i and 7i Indicator Model lbFin ozFin lbFft gFcm kgFmm Nmm Ncm Nm MR51-10Z - 10 x 0.005 - 700 x 0.5 7 x 0.005 70 x 0.05 7 x 0.005 - MR51-20Z - 20 x 0.01 - 1400 x 1 14 x 0.01 140 x 0.1 14 x 0.01 - MR51-50Z - 50 x 0.02 - 3600 x 2 36 x 0.02 350 x 0.2 35 x 0.02 - MR51-12 12 x 0.005 192 x 0.1 1 x 0.0005 - - - 135 x 0.1 1.35 x 0.001 MR51-50 50 x 0.02 800 x 0.5 4 x 0.002 - - - 570 x 0.5 5.7 x 0.005 MR51-100 100 x 0.05 1600 x 1 8 x 0.005 - - - 1150 x 0.5 11.5 x 0.005   Capacity x Resolution with a Model 3i Indicator Model lbFin ozFin kgFmm Ncm MR51-10Z - 10 x 0.01 7 x 0.005 7 x 0.005 MR51-20Z - 20 x 0.02 14 x 0.01 14 x 0.01 MR51-50Z - 50 x 0.05 36 x 0.05 36 x 0.05 MR51-12 12 x 0.01 192 x 0.2 - 135 x 0.1 MR51-50 50 x 0.05 800 x 1 - 570 x 0.5 MR51-100 100 x 0.1 1600 x 2 - 1150 x 1   Dimensions in[mm]   G1016-1 Jacobs chuck for R51, 0.028"-0.25" G1016-2 * Jacobs chuck for R51, 0.062"-0.375" G1016-3 * Jacobs chuck for R51, 0.078"-0.5" G1017 Bit holder for R51, 1/4" hex