APP Wireless WiFi Remote Control Switch Single-Channel wireless Access Control Controller 12V 24V

Product parameters: Working voltage: DC12-24V;  Switch load: each switch load is less than 1000W;  Output mode: relay switch signal output;  Working mode: Jog, self-locking, interlock;  Standby power consumption: <0.1W;  Use environment: -30～75℃, less than 95% relative temperature;  Product size: 56.4mm x 40.2mm x 20mm;  Service life: 100,000 operations;  Instructions: APP account registration: (Android system) Open the App and enter the login interface. First, register the account. After the registration is successful, log in then enter the client interface.  (I0S system) You need to enter the WIFI setting first, and just follow the software prompts.  Add device operation method: 1. Press and hold the ON/OFF button on the switch panel for 5 seconds and the green indicator light will flash, and click '+' at the bottom of the software to start searching;  2. Select the name of the WIFI you want to access and enter the password (note that the password must be remembered, otherwise