3/4 axis MACH3 CNC Controller

Items Description Output Control: Direction + pulse Drive current Isolated open circuit output: 5V, 20mA Driving method: Pulse + direction output Output frequency 2000KHZ Supported axes MK3-IV: Support 3 axes  MK4-IV: support 4 axes  MK6-IV: Supports 6 axes Spindle speed output: Support 3 modes of output Analog speed regulation voltage output 0-10V PWM output 5V, 1KHZ, duty cycle: 0 to 100% Pulse + direction output Minimum output frequency: 15HZ Maximum output frequency: 4KHZ 8 output ports drive current isolated open circuit output; maximum current: 50mA; Maximum driving voltage: 25V,  Active low 16 input ports Input current Isolated input: 5mA, Max. voltage: 25V Control signal Common anode signal Control signal type Position control Tool setting type Fixed tool setting, floating tool setting Support tool path file format *.nc; *.tap; *.txt Supported Drive Type Stepper / Servo Drive USB interface Compliant with USB2.0, Support full-speed transfer mode Features   USB does not need to install drivers, all Windous versions are plug and play. Fully support USB hot swap, and monitor USB connection status at any time. Supports up to 6-axis linkage, including jog 6-axis linkage. (Depending on the model, the number of supported axes is different). It has 2000KHZ pulse output and supports servo / stepper motor. With status indicator, it can indicate USB connection status and Mach3 connection status. All IO ports are fully isolated, strong anti-interference and stable performance. Supports spindle PWM speed output: supports spindle pulse + direction output.        8.Aluminum shell, shielding interference, stable and reliable