Kamtop Laminate Floor Repair Kit

  How to use this floor installation kit? Step 1 Spacers are used between the wall and the flooring to allow for natural expansion of wood products. The spacers have "serrated" edges that lock them into the correct position once a board is placed against them. Step 2 Start by placing the long edge of tapping block against flooring. With a hammer, gently tap the other long edge of the tapping block to push the flooring together to form a tight fit. It can be used with both adhered and glue less laminate or hardwood floating flooring systems. Step 3 Place the short end of the pull bar down so the lip hangs down over the end of the flooring panel With the tall end pointing up use a hammer and gently tap the tall section pulling the flooring together.