Tacoma Rear Shackle Flip w/ 4" Shackle

This shackle flip design is like no others. It shifts the pivot point about 6 inches forward to allow for a longer shackle and a more compliant ride with 6+" of down-travel from ride height. Upward travel is dependent on leaf spring stiffness and the weight of the truck. This kit comes with a 4 inch shackle that can be upgraded to variable lengths. Bolt on kit. NO WELDING REQUIRED! Installation requirements:-Will need to remove the old leaf spring hanger-Will need to drill out rivets and bore out holes with 1/2" Drill bits-There is an existing forward hole that needs to be bored out to 1/2"-Will Need to trim off Exhaust Tail Pipe Recommended Additional Modifications:-Extended Brake lines and shocks are needed in order to achieve full droop (Link for Brake Lines)-Extended Fox 2.0 shocks which can be found here (pictures don't match the actual product)- https://amzn.to/49jUTm3-Extended bump stops and limit straps to safely use full travel of suspension without damaging shocks when traver