52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Kit

Type1:71 cc EngineTechnical Details:Engine: Single Cylinder . 2-stroke . air-cooledCylinder capacity : 71ccFuel mix: 25/1Bit length : 31"Safety: Bit LockPower：3.2kwCarburetor with pumpEasy starting system (cord starter). Centrifugal clutchChange bits quickly and easilyWeight : 10.85 Kg. (without bit)Accessories:Fuel Mixing BottleToolkit for assemblyType2:52 cc Engine: Please keep the choke to on position when the machine is in use!Technical details:Engine: Single Cylinder . 2-stroke . air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Safety: Bit Lock.Power: 1.9KW/7500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 10.35 Kg. (without bit).Rotational Speed：8500RPMhorsepower: 2.4 psAccessories:4'' 6'' 8'' Drill Bits only Accessories:Fuel Mixing Bottle.Toolkit for assembly.Type3:4'' 6'' 8'' Drill Bits only3 bits: 4" . 6" and 8".Extension Bar: 12".Supplied with bits of 4" . 6" & 8" . the auger can drill holes of various diameters.Type4:71 cc Engine + 4'' 6'' 8'' Drill Bits  Type5: 52 cc Engine + 4'' 6'' 8'' Drill BitsStart steps:1. Please remember to close the air door and then pull the starter (don't forget this step . otherwise you will not be able to ignite when you dead lift)2. Pull the rope starter 3-5 times . the total length of the rope is 70cm . and the safety distance is 30-50cm. If the safety distance is exceeded . the rope will be broken . not the longer the rope is . the better3. After the start is successful . remember to open the damper (not to pull the starter when opening the damper. When the damper is opened . too much air enters and there is too little oxygen . it is difficult to start . so pull the starter when the damper is closed.After the machine starts successfully . open the damper.Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm . and pulling the rope hard will cause the rope to break. After breaking . you need to buy the starter again.Supplied with bits of 4" . 6" & 8" . the auger can drill holes of various diameters.likely to shear gears.Technical details:Engine: Single Cylinder . 2-stroke . air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4" . 6" and 8".Bit length: 31".Safety: Bit Lock.Power: 1.9KW/7500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 10.35 Kg. (without bit).horsepower: 2.4 psAccessories:3 bits: 4" . 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Toolkit for assembly.Type6:(2.3HP)52 cc Engine + 3xDrill Bits Description:Supplied with bits of 4" . 6" & 8" . the auger can drill holes of various diameters.Engine: Single Cylinder . 2-stroke . air-cooled.Cylinder capacity : 52cc.Fuel mix: 25/1.Bits : 4" . 6" and 8".Safety: Bit Lock.Power：1.7W/8500rpmCarburetor with pump.Easy starting system (cord starter). Centrifugal clutch.Change bits quickly and easily.Weight : 11.6 Kg. (without bit).Accessories:3 bits: 4" . 6" and 8".Extension Bar: 12".Fuel Mixing Bottle.Tool kit for assembly.