DB44 relay terminal block express wiring crimp for Delta B2 leisai invt inovance and other servo wiring Servo terminal block

Terminal block:Genuine spring-loaded terminal blocks with strong and stable wiring, convenient and fastThe terminal block corresponds to the 44P D-SUB connectorStable signal transmission, safe and reliableNo need to weld wires, just one to one pin wiring, clear parametersGND for the plug surgical ground, has been led to the terminal, convenient ground wireCan be directly applied to the board, servo driver signal interface Terminal block specifications: Model: HL-FX-DB44/F-SP Connector type: 44P D-SUB Female Rated voltage: DC24V, AC125V Output terminal: European type Insulation resistance: 100 megohms or more (DC500V) Withstanding voltage: AC500V, 1min Operating temperature: -20 degrees Celsius ~ +55 degrees Celsius Suitable wire: AWG 22-16(0.3~1.25 square mm), 6~7mm Mounting method: DIN 35mm rail, flat panel mounting Suitable use: mechanical equipment, PLC, industrial control Pitch - 5.0mm.Rated voltage - 150V.Rated current - 10A.Wire range - 26-16AWG.Strip length - 5mm.Screws - M2,steel,Cr3+ Zn plated.Torque - 0.2Nm (1.7Lb-In.) Cables:Use twisted shielded wire, strong anti-interference abilityHL-DB44-M/M-1M servo controller with 44P plug, convenient for quick wiringThere is a loose wire way, convenient for flexible use Cable specifications: Wire gauge: AWG28 Braiding network: twisted shielded wire Conductor composition: 7/0.127 Conductor material: soft copper wire Coating layer: PVC Conductor impedance and insulation resistance (20 degrees Celsius): conductor impedance: 239 Ohm/Kn or less; insulation resistance: 50 megohm/Kn or more Withstand voltage (air): AC500V/min