Jeio Tech IST Series Incubated Shakers
Overview Transparent lid offers great visibility and gas spring supports ensure hand-down handling of the samples by allowing immediate and easy access to your samples. Temperature range: Ambient +5°C to 80°C for IST-3075 / 4075. Ambient -15°C (Min. +15) to 80°C for IST-3075R / 4075R. Competitive high shaking speed up to 500 rpm. Orbital shaking motion in 19mm diameter. Microprocessor PID control. Three point temperature calibration / Automatic tuning. Wide speed range even with heavy workload. Equipped with a maintenance-free BLDC motor to generate smooth, quiet, uniform, and yet powerful shaking motion. Best effort run function intelligently manages its rpm to keep shaking even workload is out of its capacity. Automatic shaking speed adjustment in case of excessive workload such as unbalanced load placement, unusual vibrations caused from unstable floor or external shock. Pleasant test environment by the smooth acceleration and deceleration control. Smooth start and smooth stop function prevents chemical spills from flasks or test tubes. High-velocity fan ensures uniform temperature distribution and rapid thermal recovery after door open. Air-tight silicone door seal to provide excellent temperature uniformity Convenience Intuitive touch screen LCD controller with easy icons and logical menus. Easy-set digital timer for shaking operation. (1 min. to 999 hr. 59 min.) Wide sample monitoring and convenient sample loading. Convenient sample monitoring without affecting inside environment thanks to the three side transparent acryl lid with bright LED lamps. Gas spring lid supports providing smooth motion, soft opening and closing. Repetitive task can be easily performed as the platform stops where it starts. Stopping the shaking platform always at the same position is highly beneficial for automated dosing or sampling process. Corrosion resistance stainless steel interior. Built-in RS-232 port and USB port for external control and data collection. Safety Automatic run after power interruption. Temperature and shaking speed deviation alarm. Over-current protection, Stalled platform check. Mechanical over-temperature protection device. Environment-friendly CFC-free refrigerant. (for IST-3075R / 4075R) Key Attributes Cu ft. 1.9, 2.9 Max Temp 80°C Min Temp Ambient -15°C (Min. +15) Temp Uniformity ± 0.1°C Interior Outlets No Alarms Yes Datalogging Capable Yes Warranty (years) 1 (2 years after submission of warranty registration card) Site Benchtop Weight (lbs) 143, 161, 179, 198 Manufacturer Specifications Model IST-3075 IST-3075R IST-4075 IST-4075R Temperature Range (℃ / ℉) Amb. +5 to 80 / Amb. +9 to 176 Amb. -15 (Min. +15) to 80 /Amb. -27 (Min. +27) to 176 Amb. +5 to 80 / Amb. +9 to 176 Amb. -15 (Min. +15) to 80 /Amb. -27 (Min. +27) to 176 Fluctuationat 37℃ in flask (±℃ / ℉) 0.1 / 0.18 Variationat 37℃ in flask (±℃ / ℉) 0.5 / 0.90 Refrigerator (Hp) - 1 / 6 HBP - 1 / 6 HBP Shaking system Motion type Orbital Amplitude size (mm / inch, dia.) 19.1 / 0.75 Speed range (RPM) 20 to 500 Accuracy ±1% of set speed (≥100rpm) / ±1 (≤100rpm) Timer 1 min. to 999 hr 59 min. Max. load (kg / Ibs) 10 / 22.0 at 500 rpm 15 / 33.1 at 400 rpm 14 / 30.9 at 500 rpm 21 / 46.3 at 400 rpm Dimension Volume (L / cu ft) 53 / 1.9 83 / 2.9 Platform (W×D) (mm / inch) 350×350 / 13.8×13.8 450×450 / 17.7×17.7 Interior (W×D×H) (mm / inch) 410×410×320 / 16.1×16.1×12.6 510×510×320 / 20.1×20.1×12.6 Exterior (W×D×H) (mm / inch) 440x785x510 / 17.3x30.9x20.1 540x 890 x510 / 21.3x35x20.1 Net weight (Kg / lbs) 65 / 143.3 73 / 160.9 81 / 178.6 90 / 198.4 Electrical requirements (230V) 60Hz, 4A 60Hz, 5.5A 60Hz, 4A 60Hz, 5.5A Cat. No. AAH23411K AAH23511K AAH23611K AAH23711K Electrical requirements (120V) 60Hz, 7.5A 60Hz, 10.1A 60Hz, 7.5A 60Hz, 10.1A Cat. No. AAH23465U AAH23565U AAH23665U AAH23765U ※ Above specifications can be changed without prior notice.