Benchmark MyTemp Digital Incubator

Overview The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc. With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature. With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32"/81cm). The instrument is supplied with two, adjustable height shelves (also available with an additional 12.0 x 15.0" stainless steel shelf). Features: Accurate temperature control from 0° to 60°C Powerful compressor maintains 0°C Stainless-steel internal chamber Internal power outlet for shaker, mixers, etc. Sized for floor standing use or on bench-tops less than 32" tall Ideal for BOD and Drosophila applications Key Attributes Cu ft. 2.3 Max Temp 60°C Min Temp 0°C Temp Uniformity ± 1.0°C Interior Outlets Yes Alarms No Datalogging Capable No Warranty (years) 2 Site Benchtop, Floor Standing Weight (lbs) 117 Manufacturer Specifications Temp. Range: 0°C to 60°C (RT-25°C to 60°C) Temp. Accuracy: 0.5°C (at 37°C) Temp. Uniformity: +/- 1.0°C (at 37°C) Temp. Increment: 0.1°C Exterior: 21.25 x 21 x 39.35 in. / 54 x 53.34 x 99.85 cm Interior: 15.75 x 12.75 x 19.75 in. / 40 x 32.4 x 50.2 cm Capacity: 65L, (2.3 cu. ft.) Capacity of BOD bottles: 30 bottles (300ml) Weight: 117 lbs / 53 kg Refrigerant: R134A Electrical: 120, 60HZ or 230V, 50Hz (385W) Warranty: 2 Years Operating Temp. Range: +10 to +30°C FAQ Does the MyTemp Digital Incubator have an access port? No, there are no access ports. When the incubator door is shut, the unit is completely sealed. A hole can be drilled in the right side to provide a port, however doing so will void the warranty. If this is something you would be interested in doing, Benchmark Scientific can provide instructions for doing so. Drilling a hole in the wrong location can destroy the incubator, and we are not responsible for any resulting damages.