Jeio Tech ILP Personal-Sized Low Temperature Incubators

Overview Compact, stackable, energy-efficient, and yet exceptionally reliable low temperature incubators using peltier technology. Models: ILP-02/12 Features: Temperature range from +10℃ to 40℃ (at 25°C ambient temperature). Contrary to conventional compressor-cooled incubators, peltier cooling technology generates little vibration, noise, and heat. Microprocessor PID control /Temperature calibration / Automatic tuning. Adjustable 3-step fan speed with defrosting time and period control. Space-saving design allows even the smaller (14L) unit to hold two 1000mL Erlenmeyer flasks. Intuitive control panel with bright LED display. (0.1℃ resolution) Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.) Convenient preset function for 3 most commonly used temperature settings. Up to 9 temperature steps and maximum 200 cycles of repetition programmable for each profile. Convenient sample monitoring without affecting chamber temperature via the inner tempered-glass door. Environment-friendly insulation material (EPDM) used for safety and convenience. (compliant with ASTM-C534 specification) RS-232 interface for external control and data collection. Automatic run after power interruption. Keypad lock function prevents accidental changes during operation. Over-temperature and over-current protection. Audible and visible open door alarms. NOTE: Incubator pictured is two ILP incubators (purchased separately) that have been stacked. PLEASE NOTE: This item is imported from Korea and usually has a 10-14 week lead time.  Key Attributes Cu ft. 0.5, 1.7 Max Temp 40°C Min Temp 10℃ Temp Uniformity ± 0.1°C Interior Outlets No Alarms Yes Datalogging Capable Yes Warranty (years) 1 (2 years after submission of warranty registration card) Site Benchtop, Stackable Weight (lbs) 60.6, 108 Manufacturer Specifications Model ILP-02 ILP-12 Chamber volume (L / cu ft) 14 / 0.5 48 / 1.7 Temperature Range (℃ / ℉) +10 to 40℃ (50~104℉) at ambient temperature of 25℃ Fluctuation 1) at 25℃ (±℃ / ℉) 0.1 / 0.18 Variation 1) at 25℃ (±℃ / ℉) 0.5 / 0.9 0.4 / 0.72 Dimension(W×D×H) Interior (mm / inch) 315×200×230/ 12.4×7.9×9.1 334×334×430/ 13.1×13.1×17 Exterior (mm / inch) 430×495×400/ 17×19.4×15.7 430×665×620/ 17×26.2×24.4 No. of wire shelf (standard / max.) 2 / 11 3 / 25 Net weight (Kg / lbs)  27.5 / 60.6  49 / 108  Electrical requirements (120V) 60Hz, 3.4A 60Hz, 6.7A Cat. No. AAH24033U AAH24043U FAQ Do the ILP Series Low-Temperature Incubators have an internal power outlet or an access port? No, the ILP Series Incubators do not have an access port nor an internal power outlet.   Can temperature data be collected via the RS-232 interface? Yes, a computer running the RS-232 Lab Tracer software can collect and record the temperature data from the ILP incubators.