Ai SolventVap SE05 Rotary Evaporator

Overview The new Ai SolventVap 0.5-gallon/2L (evaporating flask capacity) series rotary evaporators come with a modular heating bath, vertical glassware, and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection. Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 180 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation. Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail. Standard Glassware Set 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2 liters) pear shaped evaporating flask, 0.26 gallon (1 liter) round-bottomed receiving flask, and vertical or optional cold-trap condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.Features: (with standard vertical condenser) UL 61010-1 and CSA C22.2 certified Solvent-resistant PTFE and Viton gaskets ensuring long time operation. Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation. Downward-condensing vacuum connection design ensures safe vacuum operation. Modular design (individual rotary and water bath modules) for easy future upgrades. Easy multi-level manual lift with secure lock for the evaporating flask. Easy, straight-forward visual operation with digital speed and temperature display. PID temperature controller ensures accurate temperature control is maintained. Optional Cold-Trap condenser utilizes dry ice for optimal efficiency maintained, no chiller needed. Optional Package contains: Chiller : Ai -15°C 3L Compact Recirculating Chiller With Centrifugal Pump Pump : ULVAC DTC-41 1.6 Cfm 2-Stage Chemical-Duty Diaphragm Pump TUV Vacuum controller : JKEM DVR-200 DVR-300 Digital Vacuum Regulator Key Attributes  Condenser type Vertical or Cold-Trap Arm lifting Manual Temp Range (°C) Ambient to 99 Max. Flask Size 0.5, 1, or 2 Liter Brand Across International Rotation speed 10 ~ 180 rpm Stroke: N/A Temp Accuracy (°C)   Vacuum controller incuded No Programmable No Warranty (years) 1 Weight (lb) 40 Width (in) 22 Depth (in) 12.5 Height (in) 26 Manufacturer Specifications    Electrical requirements  110V 60Hz single phase, 9.8A, 1075 watts (heater: 1050 watts, rotation motor: 25 watts)  Glass material  High borosilicate glass 3.3  Evaporating flask  Capacity: 0.13 gallon (0.5L), 0.26 gallon (1L) or 0.53 gallon (2L) Maximum load: Not to exceed 60% of the flask's capacity Rotation speed: 10 to 180 rpm Evaporating speed: 20 ml per minute Lifting: weight balancing manual control with lock Max lifting distance: 4 inches (extendable to 10 inches)  Receiving flask  0.26 gallon (1L)  Condenser  Vertical option: Glassware: Vertical with dual-spiral glass tubing  Chilling fluid connection: 3/8" hose barb x 2  Vacuum connection: 3/8" hose barb x 1 Cold-Trap option: Glassware: Vertical cold trap condenser with lid Vacuum connection: 3/8" hose barb x 1  Working environment  5 to 95°F  Water bath  Temperature range: ambient to 99°C (210°F) Temperature controller: digital Capacity: 2 gallons Material: stainless steel Dimensions: 10" diameter x 5" depth x 9.75" height Media: distilled water only Max. water level: not to exceed 1" from the top rim of the bath Number of heaters: one  Vacuum  Connection: 3/8" hose barb x 1 (on condenser) Sealing: PTFE + Viton gaskets Ultimate vacuum: < 3 torrs  Safety  Dry-run, over-temp shut-off, fuse protections  Unit/shipping weight  21 / 40 Lb  Unit/shipping dimensions  22 x 12.5 x 26" / 26 x 21 x 29" (WxDxH)  Warranty  One year warranty on unit except glassware and all sealing gaskets. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your glassware, please contact us. We check all our inventory and make sure no defective glassware is sent to our customers.