Fluke 1586A Super-DAQ 1 INT/1 Exit Module 240V

Fluke 1586A 240/C Super-DAQ Accredited Calibration Precision Temperature Scanner (Fluke Registration required before purchase. Please contact Laserman for more information on +61 8 9335 1718 ) (item no. 4410108) The 1586A Super‑DAQ is the most accurate and flexible temperature data acquisition system on the market. It scans and records temperature, dc voltage, dc current, and resistance for up to 40 input channels and scan speeds as fast as 10 channels per second. The Super-DAQ can be configured for use as a multi-channel data logger in the factory or as a precision reference thermometer for bench top sensor calibration in the lab. It collects time-stamped precision temperature and electrical measurements for data analysis by technicians, engineers, and quality control personnel to verify process control, analyse interactive systems, ensure conformance to quality standards, or to correlate related events for R&D or troubleshooting. Measurement data and statistics can be viewed in tabular format for all active channels. With the graphing feature, up to four channels can be plotted at the same time, making it easy to quickly assess test setup and results before analysing the data on a PC. When configured with the DAQ-STAQ Multiplexer, the Super-DAQ has the accuracy of the best bench top reference thermometer readouts for calibration of PRTs, RTDs, thermistors, or thermocouples. Lab efficiency can be increased when the Super-DAQ is connected to a Fluke Calibration dry well or bath and Automated Sensor Test routines are run. Some temperature data acquisition applications require compliance to government and standards agency requirements. TQSoft and TQAero thermal validation software help engineers, technicians and lab managers to meet the key guidelines for temperature data collection. These software solutions provide a complete qualification, reporting, documentation, and audit trail management system. FEATURES The 1586A Super-DAQ reads PRTs, thermocouples, and thermistors with best-in-class accuracy: PRTs ± 0.005 °C (using external DAQ-STAQ Multiplexer) Thermocouples: ± 0.5 °C (using High-Capacity Module and internal CJC) Thermistors: ± 0.002 °C Four modes of operation: Scan, Monitor, Measure, Digital Multimeter (DMM) Chart up to four channels simultaneously Administrator and user profiles for protecting settings and ensuring test traceability Records up to 20 MB of data and setup files to internal non-volatile memory or to an external USB drive. Transfer data to a PC using the USB drive or LAN connection Control Fluke Calibration temperature sources such as dry-wells or micro-baths for automated calibration routines Input channels: Up to 40 isolated universal inputs Selectable scan speed: Up to 10 channels per second Alarms: Two independent, user-defined alarms for each channel indicate when an upper or lower range has been exceeded Measure thermocouples, PRTs, thermistors, dc voltage, dc current, and resistance Current reversal minimises thermoelectric effects, improving PRT/RTD measurement accuracy Two rear panel slots can be configured for the internal High-Capacity Module or the external DAQ-STAQ Multiplexer - or one of each Navigation keys for fast selection of information Standby key turns the display and keypad off which eliminates warm-up time Function soft keys support fast setup and operation Measure/DMM function for quick measurements and recording with minimal setup Line voltage and fuse selector Power switch and line cord connector USB and Ethernet ports used for remote operation Digital external alarm trigger outputs Mx + B scaling and channel offset zero function Supported by TQSoft and TQAero thermal validation software for FDA 21 CFR Part 11 and AMS 2750 compliant data collection 6 1/2 digit display resolution for dc voltage, dc current, and resistance Applications Thermal mapping Temperature validation Process sensor calibration Automotive Pharmaceutical Biotechnology Food processing Aerospace and more! SPECIFICATIONS Mains Voltage: 100V Setting: 90V to 110V 120V Setting: 108V to 132V 220V Setting: 198V to 242V 240V Setting: 216V to 264V Frequency: 47Hz to 440Hz Power Consumption: 36VA peak (24W average) Environment Temperature: Operating: 0°C to 50°C Full accuracy: 18°C to 28°C Storage: -20°C to 70°C Warm-up: 1 hour to full accuracy specifications  Relative Humidity (non-condensing): Operating:  0°C to 30°C < 80%; 30°C to 50°C < 50% Storage: -20°C to 70°C < 95% Altitude: Operating: 2,000m Storage: 12,000m Vibration & Shock: Complies with MIL-PRF-28800F Class 3 Channel Capacity: Total Analog Channels: 45 Voltage/Resistance Channels: 41 Current Channels:  5 Digital I/O: 8 bits Totalizer: 1 Alarm Outputs: 6 Trigger Input: 1 Channel Input Connector Types: 1586A Channel 001 (front panel): gold pins, bare wire, spade lugs, banana plugs DAQ-STAQ Multiplexer: gold pins, bare wire, mini spade lugs, mini banana plugs, mini-jack thermocouple High-Capacity Module: gold pins, bare wire Input Protection: 50V all functions, terminals and ranges Math Channels:  Number of Channels: 20Operations: sum, difference, multiply, divide, polynomial, power, square root, reciprocal, exponential, logarithm, absolute value, average, maximum, minimum Triggers: Interval, external (trigger input), alarm, remote (bus), manual, automated test Memory: Scan data RAM: 75,000 readings with timestamp Data/Setup flash memory: 20 MB USB Host Port: Connector type: Type A Function: Memory File system: FAT32 Memory capacity: 32GB USB Device Port: Connector type: Type B Class: Instrument Function: Control and data transfer Command protocol: SCPI LAN: Function: Control and data transfer Network protocols: Ethernet 10/100, TCP/IP Command protocol: SCPI RS-232: Connector: D-sub 9 pin (DE-9) Baud rates: 1200, 2400, 4800, 9600, 19200, 38400 Function: Temperature source control output Conformity: CE, CSA, IEC 61010 3rd ed. Dimensions (L x W x H): 385mm x 245mm x 150mm Weight (typical configuration): 6kg