Fluke Calibration Equipment Pressure P3025 Gas Deadweight Tester, Dual Vac/Pressure

Fluke P3025 Gas Deadweight Tester, Dual Vac/Pressure (Fluke Registration required before purchase. Please contact Laserman for more information on +61 8 9335 1718 ) (item no. 4184674, 4184688, 4184695, 4184707, 4184718, 4184729, 4184734, 4184741, 4184752, 4184765) Product overview: Fluke Calibration P3000 Pneumatic Deadweight Testers This versatile instrument provides calibrations from 1-30 inHg vacuum (0.03-1 bar) and 3-500 psi (0.2-35 bar) in one extremely accurate yet easy to use primary standard. A selector valve converts the unit from pressure to vacuum mode without the need to exchange pistons. Units are manufactured to the highest standards with certified accuracies traceable to International Standards Laboratories such as the National Institute of Standards and Technology (NIST). These piston/cylinder type pneumatic standards provide excellent stability, repeatability and accuracy. An optional built-in hand pump can be added for both pressure and vacuum generation. Features 0.015% of reading accuracy standard (0.008% optional) 1-30 inHg vacuum (0.03-1 bar vacuum) 3-500 psi (0.2-35 bar) pressure inH2O and mbar ranges available Series 3 non-magnetic stainless steel weights Units can be trimmed to local gravity FOC Models: Fluke Calibration P3000 Pneumatic Deadweight Testers Fluke P3025-1-P Fluke Calibration P3025-1-P Pneumatic Deadweight TestersPressure range 0.2 to 35 bar Fluke P3025-2-P Fluke Calibration P3025-2-P Pneumatic Deadweight TestersPressure range 0.2 to 35 kgf/cm² Fluke P3025-3-P Fluke Calibration P3025-3-P Pneumatic Deadweight TestersPressure range 0.2 to 35 kgf/cm² Fluke P3025-4-P Fluke Calibration P3025-4-P Pneumatic Deadweight TestersPressure range 20 to 3,500 kPa Fluke P3025-5-P Fluke Calibration P3025-5-P Pneumatic Deadweight TestersPressure range 0.02 to 3.5 MPa Specifications: Fluke Calibration P3000 Pneumatic Deadweight Testers Accuracy Accuracy1 ±0.015% of reading (±0.008% optional) 1. Accuracy based on % of reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10% ± (accuracy class) x 10% of the piston range. Mass and PCU Materials of Construction Standard weight material Series 3 non-magnetic austenitic stainless steel Weight density 7.8 g/cm³ Optional fractional weights Solution heat treated aluminum Weight density 2.7 g/cm³ Models P3011, P3012, P3013, P3022, P3023, P3025 (V) Piston material Ceramic Cylinder material Martensitic steel Coefficient of expansion 11 ppm/°C Models P3014, P3015, P3025 (P) P3031, P3032 (P & V) Piston material Tungsten carbide Cylinder material Martensitic steel Coefficient of expansion 16.5 ppm/°C Model P3016 Piston material Tungsten carbide Cylinder Material Tungsten carbide Coefficient of Expansion 11 ppm/°C General Test port adaptors 1/8, 1/4, 3/8 and ½ NPT or BSP Instrument weight 24 lbs Instrument size (W x D x H) 17.5 x 12 x 8.5 Mass set weight (typical) 65 lbs Minimum Standard Weight Increments P3012, P3022 Pressure 1 inH2O, (5 mbar) P3013, P3023 Pressure 2 inH2O, (10 mbar) P3014, P3015, P3025 Pressure 1 psi, (0.1 bar) P3016, P3031, P3032 1 psi, (0.1 bar) P3011, P3022, P3023, P3025 Vacuum 0.2 inHg (10 mbar) Optional Fractional Weights P3014, P3015, P3025 Pressure 0.1 psi (0.01 bar) Built-in Hand Pumps Pressure mode Max pressure 300 psi (20 bar) Vacuum mode To 90% vacuum Operating Fluid for Liquid Lubricated Models 55-655 Mineral oil (standard) Krytox For oxygen-safe applications (optional) Options PressCal Software Windows-based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Calibration details are then stored and/or used to automatically create a calibration certificate. PressCal is provided as standard with all 0.008% instruments. Krytox As operating fluid for liquid lubricated gas operated models.