TORO DINGO auger bits for mini loaders

DESCRIPTION Revised 2/24 Auger Bits Available in 6" 9" 12" 15" 18" 24" & 30" . Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flighting's are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 3/8"  thick continuous steel where many other augers are 1/8" thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components. THESE BITS ARE USED ON TORO AUGER DRIVES 22805 OR 22806 OPTIONS THROUGH PARTS Carbide Teeth & Pilot For the most demanding conditions, Toro has carbide tooth and pilot options: Wisdom tooth (part number 104-5996) Chisel tooth (part number 104-5997) Hard face Pilot (part number 104-5998)  SPECIFICATIONS  SKU # DESCRIPTION LB 22814 18" AUGER BIT 134 22815 24" AUGER BIT 173 22816 30" AUGER BIT 220 22818 12" AUGER EXTENSION 25 22819 24" AUGER EXTENSION 25 22820 6" FULL FLIGHT AUGER BIT 36 22821 9" FULL FLIGHT AUGER BIT 74 22822 12" FULL FLIGHT AUGER BIT 96 22823 15" FULL FLIGHT AUGER BIT 109