
CZCL LED Displays Standard Power Supply A-350-5 5V60A LED Low Profile Switching Power Supply
CZCL A-350-5 5V60A LED Displays Standard Power Supply Product model: A-350-5DC output: 5VOutput current range: 0 ~ 60ARipple noise Note 2 0 ~ 50 ℃ 100mV 120mV 150mV 280mVPeak voltage: -25 ~ 0 ℃ 200mV 240mV 300mV 560mVOutput voltage adjustment range: ± 10% of rated output voltageVoltage regulation accuracy: ± 2.0% Power supply voltage adjustment rate: ± 15%Load regulation rate: ± 2.0%Output start time ≤ 4S (220Vac input, full load)Output hold time ≥16mS (220Vac input, full load)Temperature coefficient: ± 0.03% / ℃Output: voltage overshoot <5.0%Input voltage range: 200Vac ~ 240VacFrequency range: 47Hz ~ 63HzEfficiency (typical): 220Vac 85%Input current (maximum): 2.5AInput: Start-up inrush current (typical value) 50A @ 220Vac power cold startOvercurrent protection: 90% ~ 105% rated output current, constant powerProtection function: over power protection 90% ~ 105% rated output power, constant powerShort-circuit protection: It can be short-circuited for a long time, and can be automatically recovered after eliminating the short-circuitWorking temperature and humidity: -25 ℃ ~ 50 ℃; 20% ~ 90% RH non-condensing Working environmentStorage temperature and humidity: -40 ℃ ~ 85 ℃; 10% ~ 95% RH non-condensingSafety standard: EN60950-1Dielectric strength: input-output: 3.0KVac / 10mA;Input-ground: 1.5KVac / 10mA; output-ground: 0.5KVDC / 10mAInsulation resistance: 100M ohms leakage currentInput to ground ≤3.5mA Input to output ≤0.25mA (230Vac)Safety and Electromagnetic Compatibility Standard Electromagnetic Immunity EN61000-4-2,4,5,11; ENV50204, Class A Light Industry Standard MTBF (MIL-HDBK-217F) More than 100,000Hrs (25 ℃, full load)Dimensions (L * W * H): 227X115X50mmCooling method Forced air cooling Model Voltage Ripple Accuracy Effectiveness A-350-3.3 3.3V,50A 1% 100mV 72% A-350-5 5V,60A 1% 100mV 78% A-350-7.5 7.5V,40A 1% 100mV 79% A-350-12 12V,25A 0.50% 100mV 81% A-350-13.8 13.8V,22A 0.50% 100mV 81% A-350-15 15V,20A 0.50% 100mV 82% A-350-24 24V,12.5A 0.50% 150mV 84% A-350-48 48V,6.5A 0.50% 150mV 85% Note 1. Unless otherwise specified, all specifications are rated input, rated load, and 25 ° C ambient temperature. 2. Ripple noise test method: use a 12 # twisted pair, and the terminal should be connected in parallel with 0.1uF And 10uF of capacitance, measured under the 20MHz bandwidth of the oscilloscope. 3. The power supply will be installed as a component on the final device, the final device still needs to meet the EMC conditions