AC Infinity Controller 69 | Controls Four Devices | App Enabled | BT

CONTROLLER 69, INDEPENDENT PROGRAMS FOR FOUR DEVICES, DYNAMIC TEMPERATURE, HUMIDITY, SCHEDULING, CYCLES, LEVELS CONTROL, DATA APP, BLUETOOTH A next-gen controller designed to provide AC Infinity devices with smart programming to produce the most optimized environment. This central command unit connects with up to four different devices from fans to lights to provide each with independent climate and time-based programming. The backlit display reads temperature in Fahrenheit or Celsius and can be switched off while programs run in the background. Built with a kickstand and includes hardware to be hung on walls. The 12-foot sensor probe with thermal alloy head accurately detects current temperature and humidity conditions.   Integrated Controls A digital controller designed to equip AC Infinity devices with smart controls to produce the optimal environment. Control up to four devices from fans to grow lights and provide each with their own independent programming. Automate devices to dynamically change speed and brightness levels in response to temperature and humidity. Additional programming includes grow cycles, scheduling, timers, minimum levels, and custom transitions. Connect with our app via Bluetooth to unlock advance programs, set alarms, notifications, and view climate data.   Intelligent Programming Connect up to four devices to provide each with shared or independent programming. Go beyond basic on/off triggering by setting dynamic programs that adjust fan speed and light intensity in response to changing temperature and humidity. Set minimum baseline levels that your devices will run at constantly, only increasing when triggers are activated. Timer, cycle, and schedule modes add custom on-demand activation for a variety of indoor growing uses. Securely connect with the AC Infinity app via Bluetooth to remotely access your devices, unlock advance programs, set alarms, notifications, view historical charts, and export CSV data. Compatibility Devices within the UIS™ ecosystem which includes all AC Infinity LED grow lights and EC fans are compatible. Includes two adapter dongles to connect with EC-motor fans built with 4-pin Molex connectors. Compatible AC Infinity series devices include: AIRLIFT Series – Shutter Exhaust Fans CLOUDFORGE Series – Environmental Humidifiers CLOUDLIFT Series – Floor Wall Circulation Fans CLOUDLINE Series – Inline Duct Fans CLOUDRAY Series – Clip-on Circulation Fans CLOUDWAY Series – Whole House Fans IONBEAM Series – LED Grow Light Bars IONGRID Series – Halo LED Grow Lights IONBOARD Series – LED Grow Light Boards UIS Control Plug – Control Outlet Devices (0=Off, 1-10=On) UIS Lighting Adapters – Control Other Brand Lights Optional Add-Ons UIS LIGHTING ADAPTER A --Enables UIS™ controllers to work with RJ11 and RJ12 connector grow lights with PWM or 0-10V dimmers. --Control lights from MARS, SPIDER, VIPAR, SUN, VOLT, and more. Not all models are compatible. --Automate light cycles, scheduling, and climate triggers; unlock data graphs and alert notifications via our app. --Monitor and control your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. An adapter dongle designed to connect the UIS controllers to grow lights from other manufacturers. The Type-A adapter works only with grow lights with RJ11 and RJ12 connectors that use PWM or 0-10V dimmers; see below for compatibility list. By connecting your lighting fixture to one of our controllers, you can automate it with light cycles, scheduling, and dynamic responses to temperature and humidity. It will also join the UIS platform of smart controllers and grow equipment, all working together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Once your first light has connected to the controller, you can control additional RJ11 or RJ12 connector light’s using that manufacturer’s daisy chain method. Includes a 10-foot RJ11/12 extension cord. Compatible with our controllers with UIS connectors like CONTROLLER 69, CONTROLLER 69 WiFi and CONTROLLER 69 PRO; an additional UIS device is required to power the controller.  LIGHT COMPATIBILITY Most RJ11 and RJ12 connector grow lights using PWM or 0-10V dimming standards can work with the Type-A lighting adapter. However, each light manufacturer's dimming protocol is different so some may have a limited dimming range with our controllers. Lights that have spectrum control or utilize a resistor protocol are not compatible. See our other lighting adapters or the UIS control plug if your light is not compatible. A firmware update via the AC Infinity app may be required for your UIS controller to work with this dongle. Compatible lights include, but are not limited to: BESTVA - Bat and TF Series GROWER'S CHOICE - ROI Series (Limited Dimming Range) HLG - All models with Mean Well drivers HYPHOTONFLUX - HPF and PRO Series MARS HYDRO - FC, FC-E, SP, and TS Series Models with Self-Branded drivers. See our Type-B adapter if your model has a MOSO or MEANWELL driver. MEDIC GROW - EZ, FOLD, and SMART Series MEDIC GROW - MINI SUN Series (Limited Dimming Range) PHANTOM - Pheno 440 PHLIZON - FD, PL, and PRO Series (Limited Dimming Range) PHOTONTEK - X, XT, SQ Series that are compatible with their Dimmer to RJ12 Adapter (Limited Dimming Range) SPIDER FARMER - G, SE, and SF Series Models with Self-Branded drivers. See our Type-B adapter if your model has a MOSO or MEANWELL driver. SUNRAISE - Bar Series VIPARSPECTRA - KS5000 VIVOSUN - VS Series (Limited Dimming Range) VOLT - VL and FL Series All BRANDS listed above are registered trademarks of their respective companies. AC Infinity does not claim any affiliation with these brands.   UIS LIGHTING ADAPTER TYPE-B --Enables UIS™ controllers to work with RJ11 and RJ12 connector grow lights with resistor dimmers. --Control previous gen grow lights using resistor dimming technology. Compatibility list coming soon. --Automate light cycles, scheduling, and climate triggers; unlock data graphs and alert notifications via our app. --Monitor and control your grow on your phone from anywhere with our latest WiFi-enabled UIS controllers. An adapter dongle designed to connect our UIS controllers to grow lights from other manufacturers. The Type-B adapter works only with grow lights with RJ11 and RJ12 connectors that use resistor dimmers; see below for compatibility list. By connecting your lighting fixture to one of our controllers, you can automate it with light cycles, scheduling, and dynamic responses to temperature and humidity. It will also join the UIS platform of smart controllers and grow equipment, all working together to create the ideal environment for your plants. Our WiFi-enabled smart controllers allow you to monitor and control your grow on your phone from anywhere while providing data charts and alert notifications via the AC Infinity app. Once your first light has connected to the controller, you can control additional RJ11 or RJ12 connector light’s using that manufacturer’s daisy chain method. Includes a 10-foot RJ11/12 extension cord. Compatible with our controllers with UIS connectors like CONTROLLER 69, CONTROLLER 69 WiFi and CONTROLLER 69 PRO; an additional UIS device is required to power the controller.  LIGHT COMPATIBILITY Most RJ11 and RJ12 connector grow lights using the resistor dimming standards can work with the Type-B lighting adapter. However, each light manufacturer's dimming protocol is different so some may have a limited dimming range with our controllers. Lights that have spectrum control or utilizing a PWM or voltage protocol are not compatible. See our other lighting adapters or the UIS control plug if your light is not compatible. A firmware update via the AC Infinity app may be required for your UIS controller to work with this dongle. Compatible lights include, but are not limited to: CHILLED TECH - GROWCRAFT Series that are compatible with their Push-Lock Dimmer to RJ12 Adapter (Model GC-DIM-TM-RJ12-1). HLG - All models with Inventronics and Optotronics drivers MARS HYDRO - FC, FC-E, SP, and TS Series Models with MOSO/MEANWELL drivers.  See our Type-A adapter if your model has a MARS HYDRO driver. MIGRO - ARAY Series SPIDER FARMER - SE and SF Series Models with MOSO/MEANWELL drivers. See our Type-A adapter if your model has a SPIDER FARMER driver. MORE MODELS ADDED SOON! All BRANDS listed above are registered trademarks of their respective companies. AC Infinity does not claim any affiliation with these brands.   Additional Info Manual FCC Certification   Controller Specs    Manufacturer    AC Infinity Inc.    Product Name    CONTROLLER 69    Product Model    CTR69A    UPC Code    819137022652    Product and Mounting Dimensions - Controller    Total Dimensions    3.66 x 3.11 x 0.98 in. (9.3 x 7.9 x 2.5 cm)    Display Size    3.5 x 1.4 in. (9 x 3.5 cm)    Sensor Probe Length    144 in. (12 feet)    Product Performance and Technical Specs    Maximum Devices Controlled    4    Max Power Supported    10 W    Programming Temperatures    32 to 140°F    Operating Voltage    9 to 18V    Power    1 W    Current    0.1 A    Power Input    12V from Device    Operating Humidity    35 to 85% RH    FCC Cert. (Whole Product)    Certification    Product Manual    Product Manual    Manual