Lightning Lap Natural Polishing Lap

Lightning Lap Natural Polishing Lap The Natural Lightning Lap is individually crafted to have a smooth, extremely durable polishing surface and can used with any kind of oxide, or diamond polishes (1200-grit or finer). It's impervious to chemicals as well as high heat. The polishing surface is extremely hard; greater than cast iron. The unique cohesive nature of the Natural Lightning Lap allows freely-applied polishes in oil or water sprays or slurries to temporarily reside in micro pockets all along the surface and remain there to promote a fine finish. Polishing can be achieved quickly with extremely flat facets. Apply only enough hand pressure on the stone to the lap until you feel a bit of a "tug or pull" of the stone across the lap surface. Holding on to the stone instead of the quill or dop shank is also a preferred technique. This prevents stress to the dopped joint which can cause your stone to fly off the dop! Lubricants include distilled, IO, purified or charcoal-filtered water, silicone oil extender, Vaseline, oil, WD-40, olive oil, etc; just about anything you choose to use. Clean, pure lubricants are essential to a scratch-free facet surface! Tap water may contain all manner of impurities. So it's best to stay away from its use. Filtered drinking water is preferred if purer forms of water cannot be obtained. Do NOT reuse water or oils that have been used in the polishing process! A thorough cleansing between polishing mediums is all that is needed to insure no cross-contamination. Cleanup with alcohol, soap and water, 3M scrubber and Bon Ami kitchen cleanser or similar, will ensure a clean surface for your next polishing medium. See Lightning Lap's Free Instructions for more details. Available in both Standard and Topper configurations. The Lightning Lap Natural Topper Polishing System is the same product as the original LL, but with a 4 mm thickness (0.125"). It must be used on a master lap.  1/2" arbor hole Please note. Due to the popularity of our Standard format of Lightning laps, ready to ship supplies are limited. If you need to order more than one Standard format lap per type or grit size, we may not have stock on hand for immediate shipment. Orders of multiple standard toppers of the same type or grit size may take up to six weeks for fulfillment, please contact us for details. Customers may choose to have any back ordered Standard laps removed from invoice and refunded if needed. Thank you for your understanding.