ECUMaster ADU Display Dash and Logger Rev2

Please note, a USB to CAN cable or equivalent is required to program the PMU. The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.) and changed manually or automatically (based on an advanced conditions system). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified using user-friendly, Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independently of the actual page displayed. FULLY CONFIGURABLE SEND AND RECEIVE CAN BUS ALLOWS DEVICE TO BE PROGRAMMED TO WORK WITH VIRTUALLY ANY ENGINE MANAGEMENT SYSTEM. ADU7 AutoSport Advanced Display Unit with Logging The ADU7 AutoSport Display is identical in specification to the regular ADU7, but features a 37 position AutoSport connector instead of the AMP connector on the original ADU7. AutoSport connectors are used in the highest tiers of motorsports and are the most compact and robust connector available. This connector uses a size 22 gold plated solid contact. Please ensure you have proper tooling available. Specifications: General: Operating voltage:         6-22V, immunity to transients according to ISO 7637, with reverse polarity protection CPU:                             32 bits, automotive, 90MIPS Temperature range:       -30C to 80C Enclosure:                     Anodized aluminium, CNC machined, IP65 Connector:                    Automotive 36-way AMP connector 5'' display:                    Antiglare TFT, 800x480, active area 108x64.8mm, luminance 600 cd/m2 7'' display:                    Antiglare TFT, 800x480, active area 154.08x85.92mm, luminance 500cd/m2 Alarms:                        15 x ultrabright RGB LEDs   Communication: Can:                             2 x CAN 2.0B (250, 500, 1000 kbps) independent Serial:                          RS232 (Rx, Tx) USB:                            Yes, for data logging   Inputs: Analogue:                     8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns Digital inputs:               8 inputs with user defined sensitivity   Outputs: General purpose:           2 x protected 3A low side outputs   Other: Accelerometer:              3 axis gyro and 3 axis acceleration Light sensor:                 Built in for auto brightness Temperature sensor:      Built in to trace device internal temperature Real time clock:             Built in with battery backup   Features: Lap timer:                     Lap timer with memory, predictive timing, triggered by a beacon or GPS Customization:              48 available pages, user defined content, custom graphics allowed Functions:                     Math channels + logical functions Overlays:                      Yes, user defined CAN stream:                 User defined, up to 48 input messages, predefined streams for popular ECUs   Logging: Memory:                       USB Flash Memory Rate:                            Up to 500Hz per channel Real time clock:             Yes