Garrett | Z-Lynk Wireless Transmitter | LMS Metal Detecting
Garrett Z-Lynk Wireless System Transmitter with USB Cable and 1/4 inch headphone adapter Keep all of your metal detectors wireless-ready by picking up additional Z-Lynk transmitters. Garrett Z-Lynk Wireless System. Transmitter Module with USB to 1/4" headphone jack Adapter and USB charging Cable. Use your favorite land headphone with 1/4" plug and go wireless! All the benefits of using headphones, without being tied to your metal detector. Nearly universal; designed to work with most metal detector brands and most wired headphones. Note: Z-Lynk Wireless System requires use of headphones with a 1/4" headphone jack (not included).*Please Note : WT-1 Transmitter requires a Z-Lynk Headphone Cable with 2-Pin AT Connector Cable for AT Gold, AT Pro, ATX or Sea Hunter Mark II to operate wirelessly with 1/4" jack headphones. Product Description: The Garrett Z-Lynk Wireless Headphone System gives you freedom of using headphones, without being tied to your metal detector by wires. Plus, it has lightning-fast speed of up to 6 times faster than Bluetooth speed, and 4 times faster than other wireless headphone kits. Recharge the Z-Lynk transmitter and receiver modules with the supplied cables by attaching them to a laptop, your vehicle’s USB port, or a phone charger’s USB power block. Each module has an Auto-Off function that will switch off power after 30 minutes of inactivity. *Please Note : Z-Lynk Wireless Headphone System requires use of headphones with 1/4" headphone jack connector. For use with ACE 400, ACE 400i, ACE 350, Euro ACE, ACE 300, ACE 300i, ACE 250, ACE 200, ACE 200i, ACE 150, and GTI 2500. AT detectors require 2-Pin AT Connector Cable to operate wirelessly with 1/4" jack headphones. Product highlights: Freedom: all the benefits of using headphones, without being tied to your metal detector. Lightning-fast speed: Near-zero delay (17-milliseconds) from your detector to your headphones. Six times faster than Bluetooth speed, and up to four times faster than other wireless headphone kits. Versatility: Nearly universal; designed to work with most detector brands and most wired headphones. Frequency-Hopping Technology: Creates an infinite number of channels to prevent interference with nearby headphones and wireless devices. Extended Hunting Time: Get up to 30 hours of operation per charge. Recharge the Z-Lynk modules with any micro-USB charging port—on your laptop, in your car, or with a USB power block such as a smartphone charger. Can be used on both VLF (single frequency) and pulse (multi-frequency) detectors. Recharge the Z-Lynk transmitter and receiver modules with the supplied cables by attaching them to a laptop, your vehicle’s USB port, or a phone charger’s USB power block. Each module has an Auto-Off function that will switch off power after 30 minutes of inactivity Included: Mounting Band USB Charging Cable WT-1 Wireless Transmitter 1/4" Headphone Jack Cable Operating Time 30 hours per charge (approx.) Charging Micro-USB charging port (cables included) Weight .315 lbs Operating Frequency 2.4 GHz Band Connector Type 1/4 Inch Connector Type Transmitter Waterproof No Battery Type Rechargeable Lithium Ion Warranty 2 Years, Limited Parts & Labor UPC-GTIN 009068015483