Altronix - EBRIDGE-800PCRM - IP and POE+ Over Coax Powered Receiver

Altronix - EBRIDGE-800PCRM - IP and POE+ Over Coax Powered Receiver Altronix eBridge800PCRM and eBridge100TM/eBridge100ST are CAT5e to Coax cable Ethernet adapters/Media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 100Base-T Full Duplex Ethernet digital communication to be transmitted over Coax cable. The eBridge800PCRM receivers are powered by any UL Listed, PoE midspan or endspans and pass power over the coax to the eBridge100TM/eBridge100ST hardened transceivers. This enables the eBridge800PCRM to be used in a managed manner, allowing for remote camera reset. The eBridge100TM/eBridge100ST, in turn, passes PoE+ compliant power to a PoE enabled camera or IP device. Features: Powered by a UL Listed limited power source, PoE midspan or endspan. Connectivity: RJ45, auto-crossover. Wire type: 4-pair CAT5e or better structured cable. Distance: up to 100m. Speed: 100BaseT, 100Mbps full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) Delivered to camera by eBridge100TM/eBridge100ST. Power provided by eBridge800PCRM to eBridge100TM/eBridge100ST by PoE protocol. eBridge800PCRM: Blue LED (near BNC) - Coax link connection. Yellow and Green LED (RJ45) IP Link status, 100Base-T/active. eBridge100TM: Green - PoE ON (by respective RJ45 jack). Yellow and Green LED (RJ45) IP Link status, 100Base-T/active. eBridge100ST: Green - PoE ON (by respective RJ45 jack). Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active. Blue: Coax Link is active. Product Specifications: Vendor Altronix Corporation Manufacturer Altronix SKU EBRIDGE800PCRM UID ALT100EBRIDGE800PCRM Installation Commercial Unit of Measure Each Purpose Power Over Ethernet (POE) Product Type Power Over Ethernet (POE) Adaptors Download: Installation Instructions