SECO-LARM VC-2VAQ VGA-to-BNC Converter

SECO-LARM VC-2VAQ VGA-to-BNC Converter The VC-2VAQ converts your VGA signal to be viewed on any TV, projector, or other viewing device that uses a standard BNC connector. A VGA output allows simultaneous viewing on a VGA monitor. The converter is compact and can be mounted nearly anywhere. For example, use the included VESA bracket for mounting on most VGA monitors. Features: Connect a DVR with VGA output to an existing monitor with BNC input Video standards: NTSC/PAL Auto configure resolution: Up to 1024×768 (up to 75Hz) Dual composite video (BNC) and VGA output ports On-screen display (OSD) for image adjustments including size, brightness, contrast, hue, saturation, sharpness, and more Quick installation – no driver or operating system requirements Gold-plated BNC connector for longer life Includes 5VDC power supply Specification: Type VGA to BNC Input Signal VGA Output Signal VGA: 0.7 Vp-p RGB, 15 pin female D-sub, Composite Video 1Vp-p 75ohm BNC Maximum Resolution Up to 1024×768 NTSC: 720×480 PAL: 720×576 Current Draw 500mA@5VDC Power supply 1A@5VDC, 2.5mm Dimensions 4-13/16″x3-3/16″x1-1/16″ (122x81x27 mm) Weight 9.3-oz (265g) Troubleshooting: VGA device does not function correctly Make sure power, input, and output cables are firmly connected to the converter. Make sure the video input device is turned on. Make sure the video output device is turned on. Test the coaxial cable between the video source and converter to ensure it is functional. Test the VGA cable between the video monitor and converter to ensure it is functional. Ensure that switches are set correctly for NTSC/PAL Power LED indicator not lit Make sure power is connected to the converter Download: Product Information Sheet Manual Diagram