18-inch Bar and Chain Combo .325 pitch for Husqvarna
This 18" Bar + Chain Combo has a .325 pitch, .050 gauge, and 72 drive links. It is specifically designed for Husqvarna 440E, 444, 445E, 450E models, providing reduced kickback and improved cutting control for professional woodcutters. Its stiffer bar and lighter weight offer more precise cutting, better balance on smaller saws, and less fatigue. The new sprocket nose system also extends the nose life and improves performance, while the superior chain fit up results in reduced rail wear and more accurate cutting. Combo consists of 180VXLGK095 Oregon 18 " lightweight VersaCut bar and 18" Oregon pro full chisel chain_20LPX072G. K095 Small mount - bar inside slot height .322 or 8.2mm THIS BAR FITS THE FOLLOWING model saw WITH A .325 PITCH SPROCKET. NOTE-SOME MODELS USE 3/8 PITCH instead, check sprocket and old bar for info stamped to match pitch if in doubt. Husqvarna 33, 36, 38, 40, 41, 42, 44, 45, 49, 50, 51, 55, 55 Rancher, 57, 133, 136, 140, 141, 154, 234, 238, 240, 242, 246, 254, 257, 261, 262, 335, 336, 338, 339, 340, 345, 346, 350, 351, 353, 357 , 359, 360, 362, 435, 440, 444, 445, 445E, 450, 450E, 455, 455 Rancher, 455E RANCHER, 460, 460 RANCHER, 545, 550XP, 550XPG, 555, 560XP, 560XPG ,1400, 1600. Alpina/Castor A-40, C-40, CP-41, CP-45, CP-540, CP-600, P-370, P-410, P-460, P500, P510, PRO-41, PRO-45, PRO-500, PRO-540, PRO-600 Cub Cadet CS5018, CS5220, CS5720 Echo CS-4510 Efco 147, 152, 156, 165 Dolmar 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 120si, 120 SUPER, PS-5100, PS-5105, PS-6100, PS-6800 Homelite 30, 130, 150, 150 A0, 250, 252, 290, 300, 340, CS 40, CS 50, EZ 250, MINI SL, SUPER EZ A0, XL-76, XL-100 SERIES John Deere CS46, CS52, CS56, CS62 Jonsered 45, 49, 50, 51, 52, 370, 410, 420, 425, 435, 450, 451, 455, 490, 510, 520SP, 521, 525, 535, 590, 941, 2050, 2051, 2054, 2055, 2063, 2141, 2145, 2149, 2149 TURBO, 2150, 2152, 2159, CS2238S, CS2240, CS2250, CS2250S, CS2252, CS2253, CS2253WH, CS2255, CS2258, CS2260, CS2260WH Makita DCS 430, DCS 431, DCS 460, DCS 5121, DCS 510, DCS 520i, DCS 5200, DCS 5200i, DCS 540, DCS 6000i, DCS6800i,EA5000P53G EA6100P53G, EA610153G Maruyama POLESAWS: MC-PL11, MC-PS11 McCulloch 1849 AV, 2046 AV, 2049 AV, 4600, 4700, 4900, 5000, 5500, MS 1434, MS 1436, MS 1636, MS 1839, MS 1846, MS 1849, MS 1850, MS 2046, MS 2049, MS 2050, PM 1845 AV,Pro Mac: 40, 46; Silver Eagle: 2818, 3020; Timber Bear, Timber Bear 20 Olympyk (Oleo-Mac) 938, 940C, 941, 945, 950, 951, 956, 962 Partner 410, 510, 540, P-360, P-400, P-450, P-500, P-5000 Pioneer 1074, P-21, P-26, P-28, 3270 Poulan 325 Powerhorse 190502, 190503 Redmax G390, G450AVS, G455AVS, G3800 Sears 35084, 35201 Solo 614, 630, 631, 632, 633, 638, 639, 641, 644, 645, 647, 650, 651, 651 SP, 654, 656 Stanley CS05, CS06 Note - this bar only works when matched with .325 pitch sprocket and .325 pitch chain. Chain choices for extra chains for this combo -click the part# hyperlink below to view and purchase the spare chain Oregon_20BPX072_ControlCut Micro ChiselOregon_20LPX072_PowerCut Full ChiselOregon_20LGX072_PowerCut Pro ( No low-kick guards) Full Chisel Product Type Guide Bar - Prop 65 Description WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov