Magic Computer N200/i3-N305 small host PCIe x8 slot 4NVme supports expansion of 2x10G network card DIY players’ new favorite 3D printing
Motherboard core features:Based on Intel 12th generation Alder Lake-N N100/octa-core 13-N305 low-power platformPassive cooling, open design, open source drawings, specially designed for DIY/3D printing enthusiastsA PCl-e x8 socket (PCle3.0 x4 signal) supports various network cards, hard drives and other expansionsDual HDMI+DP+Type-C four display interfaces, supporting three-screen synchronous/asynchronous displayDual intel i226-V integrated filter 2.5G RJ45 network port1 SO-DIMM DDR5 slot compatible with 4800/5200/5600MHz1 M.2NVMe socket (PCle3.0 x1 signal) compatible with 2242/2280 sizeDual SATA3.0 (6GB/s interface) dual 4pin power supply supports 2.5/3.5-inch hard driveA TF card slot supports data storage and some system startup and boot functionsA 4-pin fan power supply socket supports temperature-controlled fans and a small 3-pin fan power supply socketSpecifications:Processor: Intel N100/N200/i3-N305Codename: Elkhart LakeDisplay chip: Integrated 10th generation Intel Super Core graphics cardDisplay output: 2*HDMI1.4 1*DP 1*Type-CMemory slot: 1*SO-DIMM DDR5 compatible with 4800/5200/5600MHZI/0 chip: IT8784E-iUSB: 4*USB2.0Power supply: DC12V-19V (5.5*2.5)Network card: 2*Intel i226-V 2.5G EJ45Storage: 1*M.2 NVMe (PCle3.0x1 signal) 2*SATA3.0 (6GB/S interface) 1*TFExpansion slot: PCle x8 slot supports expansion of M.2 NVMe hard drives, network cards, etc.Serial port: 1 X RJ45_COMBIOS: AMI BIOS auto-boot upon incoming call, GPIO, watchdog, PXEPower consumption: basic power consumption 6-15WSystem support: Windows/Linux/OpenWrtWorking environment: -20~70°C; Storage: -20~75°C5%~90% relative humidity, no condensationMotherboard size: 120mm (W) X 120mm (L)Front I/O interface:1* HDD indicator light1* Power indicator light1*HDM 1.41* PD 1.41*USB 2.01*TF slot1*Type-C1*BIOS reset button1 * Power buttonback:1*DC12-19V1*USB 2.01*HDMI 1.42 * Intel 2.5G network portInternal I/O connector:1*4PIN power supply base1*TPM pin1*M.2 socket compatible with 2242/22801 * 2.5-inch hard drive power supply holder1*SO-DIMM DDR5 memory slot2*SATA3.0 socket1 * Small 4PIN power supply holder with temperature control fan1 * Small 3PIN fan power supply socket1* PCIE-x8 socket