2.5 inch SATA SSD/HDD Shield / Storage Expansion Board T300 V1.1 for NVIDIA Jetson Nano

Features FOR USE WITH: Jetson Nano OPERATING SYSTEM: All operating systems KEY FEATURES: Ideal storage solution for Jetson Nano - 2.5"" SATA HDD/SSD Shield · Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) · USB 3.1 Gen1 to SATA 6Gb/s bridge controller · USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano · Quick file transfer with high-speed USB3.1 Gen1 connectivity from a PC or a Mac · Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed · On-board DC power jack allows to provide enough power to HDD/SSD · Intelligent power management - Automatic powering off when system shutdown · With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano · USB bus-powered or powered by external power adapter · LED blue indicator indicates drive status POWER SUPPLY:  Power supply via DC jack :  5VDC ±5%. · A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!! I/O PORTS: USB Type-A socket x 1 · DC Jack 5.5x2.1mm x 1 · 22Pin SATA socket x 1 DIMENSION PCB Size: 123mm x 79mm Packing List: Bundle1： 1 x T300 V1.1 2.5 inch SATA SSD/HDD Shield 1 x USB Bridge 1 x 1 Female to 2 Male DC cable (length: 15cm) 1 x installaton screw pack Bundle2：Bundle1 + DC 5V 4A power supply