customized 1Pcs 12V single access control remote switch electric door lock light wireless remote control receiver 433

Product characteristics: 1. With the function of general on/off/centralized control: the receiving board can be equipped with a remote controller with multiple keys to realize one key open/another One key is fully closed, and another centralized control can achieve one control / multiple control. 2. output relay switch quantity: can control the load of different voltage below 270V, relay can withstand 10A In order to prolong the service life, it is not recommended to control the high power load, control 600W at 220V and control 12V. 60W, diversification control. 3. small size: small size, circuit board size is only 36*32*19mm. 4. way of work: users can modify their self locking, interlocking and working mode by themselves. 5. Learning Code: Can learn the same frequency remote controller at will. (The remote controller is lost in the process of using also need not Worried, buy a remote control directly to learn about OK, do not need to replace the whole set, greatly saving the cost of users. 6. working current: about 36MA. 7. quiescent current: about 5MA. Shipping list: 12V 1 315M wireless learning receiving module, 1 +1 remote controls (with shell).     Instructions I. learning methods: 1. self locking learning method: after power on, hold down the receiving board's learning button LED flash 1 release, hold down the need in 6 seconds. Learning the remote control button LED flash 2 proves that the key is successful. 2. point mobile learning method: after power on, hold down the receiving board's learning button LED flash 2 release, hold down the need in 6 seconds. Learning the remote control button LED flash 2 proves that the key is successful. 3. interlocking learning method: after power on, hold down the receiving board's learning button LED flash 3, release, hold down the need in 6 seconds. Learning the remote control button LED flash 2 proves that the key is successful. Two. Mode switching method: Self lock: power on state, press the learning button LED flash 1, release (press A to open, press A, and then analogy). Click: power on state, press the learning button LED flash 2, release (press A to open, loosen A off, and then analogy). Interlock: power on state, press the learning button LED flash 3, release (press A, B, B, A). Three. Remove method: hold down the learning button, do not put LED flash 4, flash 2, release, and clear the operation. Following is a multi-key remote control that controls multiple receivers to set up a single-key all-on and all-off learning method, always on and off Operate in a self locked state. Total open learning method: in standby state, press the receiver learning button twice, and hold the corresponding button of the remote control in 6 seconds LED flash 2 learning success