Raspberry Pi 18650 UPS HAT，X706 V1.1 Shield/Expansion Board supports Auto Power On for Raspberry Pi 4 model B/3B+/3B

Note Do not apply power to your Raspberry Pi via the Micro USB socket or Type-C socket. Must use the battery with built-in protection circuit. NOT supports software safe shutdown. Please use high quality power supply, the low quality power supply will generate Surge Voltage, which will damage the board chip. Overview The X706 is a multifunctional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides an advanced uninterruptible power supply and power . The X706 can be stacked with other Raspberry Pi accessory boards for enhanced applications. The X706 can also be used with the X820/X825 (2.5" HDD/SSD Shield), X850/X855/X857 (MSATA SSD shield), X862（M.2 NGFF SATA SSD Shield）, X872/X873（NVMe M.2 SATA SSD Shield）. Features Smart Uninterruptible Power Supply (UPS) Out 5.1V enough 3000mA Power Backup for even the most demanding Raspberry Pi set ups Supports 3A via Type-C socket fast charging Can work with single or dual 18650 Lithium Ion battery Integrated battery protection circuit Integrated over current protection and over voltage protection Intelligent automatic charging and discharging On-board 4 green LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100% On-board red LED show the status of battery charging or fully charged On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) On-board pin header allows to select AUTO power-on when power supplied or battery installed Powers the Raspberry Pi via the 40-pin header - no additional cabling required Standard Raspberry Pi extension interface, compatible with other expansion boards Allows power input via Type-C socket or XH2.54 connector On-board XH2.54 power input connectors allows to integrate with your products DON'T supports software safe shutdown. Technical Specification Power supply: via Type-C socket : 5Vdc ±5%, ≥3A; UPS output : 5.1V ±5% Max 8A UPS charging current: 1.8~2.2A Terminal Battery Voltage : 4.2V Recharge Threshold : 4.1V Packing List 1 x X706 V1.1 18650 UPS Shield 1 x Jumper link Pitch 2.54mm 8x M2.5 *5mm Screws 4x M2.5 *20+6mm Spacers 4x M2.5 *20mm Spacers