Raspberry Pi 4 Model B mSATA SSD X857 V2.0 Shield + X735 Power Management Board + X857-C3 Matching Metal Case

NOTE: Not include raspberry pi 4 and mSATA SSD X857 V1.2 is not be producted, and X857 V1.2 is upgraded to X857 V2.0 X857 V2.0 is not support TRIM, only support UASP! A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead. WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time. This X857 mSATA board is only suitable for raspberry pi 4, if you need mSATA SSD board for raspberry pi 3b+/3b, please refer to:X850 mSATA Board Installation video： youtu.be/HGPpfDbfyxM X857 Board Features： Ideal storage solution for Raspberry Pi 4 - mSATA SSD Shield Supports up to 2TB mSATA solid-state drive (SSD) Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller Integrated high efficiency step-Down Converter, 3.3V max 4A to power the SSD Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes) LED blue indicator indicates drive status External self-powered or USB bus-powered Onboard DC jack & XH2.54 connector for extra SSD power supply (Additional power may be required only when using a large capacity hard disk) PCB Size 85mm x 56mm Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL) Power Supply I/O ports： Power supply: 5Vdc +/-5% , Powered via Pi's USB port 5Vdc via micro-USB socket Ports & Connectors: USB socket - USB 3.0 type A x1 52P Mini PCI-E mSATA slot x1 X735 V2.5 Board Features： Some new features of X735 v2.5: Use the silent PWM cooling fan, and support fan speed is control by script, support read fan speed, and we provide sample python code. You must install shell script to enable the PWM fan work fine since it's a PWM fan, refer to X735 V2.5 Software Support TRUE AUTO ON function (in the old version,the power management function is disabled if AUTO ON is enabled) Considering that some customers use X735 together with other DAC shield, we adjusted the GPIO pins used. Please install shell script to get safe shutdown function. please refer to X735 V2.5 Software Remove the 2pin power cable from X735 v2.5 No any size changes. NOTE： Full poweroff through software is not supported when using latching power switch Do not apply power to your Raspbeery Pi via the Pi's Micro-USB socket Features： Intelligent and safe power management Equipped with both momentary button and latching switch for easy power control Press the momentary button or external momentary power switch to turn on Press the momentary button or external momentary power switch and hold for 1~2seconds to reboot Press the momentary button or external momentary power switch and hold for 3~7seconds to implement safe shutdown Press the momentary button or external momentary power switch and hold for more than 8 seconds to force shutdown Supports safe shutdown and full poweroff through software On-board switch convenient to select latching or momentary power control switches Press the latching power switch once to turn on and again to implement safe shutdown On-board LED shows the status of power on, reboot and shutdown On-board PH2.0 connectors allows to use external latching switch or momentary button Powers the Raspberry Pi via the 40-pin header - no additional cabling required Allows power input via DC jack or Micro-USB socket or XH2.54 connector Allows power output via XH2.54 socket and or the 40-pin header PWM Cooling Fan for X735 V2.5 Dedicated PWM cooling fan for Raspberry Pi Air flow up to 6.01CFM and maximum speed of 5000 RPM Smooth PWM adjustment provides a quiet experience Real-Time fan speed reading Programmable temperature and fan speed Packing List： Bundle1: 1 x X857 V2.0 mSATA SSD Storage Expansion Board 1 x X735 V2.5 Power Management Board 1 x X857-C3 Metal Case with Cooling Fan（4010）& Power Control Switch