Raspberry Pi 4B 2.5 inch SATA HDD/SSD Shield / X825 V1.5 Storage Expansion Board
Notes A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition WARNING: Do not power your Raspberry Pi via the Pi's 40-pin header and type-C socket at the same time. USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead. Power Supply Requirement Power supply: AC 100 - 240V input 50 / 60Hz, 5V DC 4A output DC Power Plug Size : 5.5*2.5mm Important Note: Please use high quality power supply, the low quality power supply will generate Surge Voltage, which will damage the board chip. Overview The X825 expansion board provides a complete storage solution for newest raspberry pi 4, it supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). Only 2.5 inch SATA interface HDD/SDD hard disk is suitable for X825 Board; It is updated from raspberry pi 3b+/3b X820 V3.0 2.5 inch SATA SSD expansion board. (Please refer to X820 if you want use the 2.5 inch SATA SSD on raspberry pi 3b+/3b/2b) For Use With Raspberry Pi 4 Model B Operating System All Raspberry Pi operating systems Key Features Ideal storage solution for Raspberry Pi 4 - 2.5" SATA HDD/SSD Shield Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD) (Theoretically it can work with 6TB or 8TB as well. But actually we do not test the X825 board with 6tb or 8tb HDD, you can have a try.) 【not recommend to use Samsung SSD】 Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controller USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see notes) On-board push button to control power on /off (Press-ON, Hold the button pressed at least 2s -OFF) On-board XH2.54 power connectors allows to power other devices LED blue indicator indicates drive status External Self Powered - Do not require power from Raspberry Pi USB port Powers the Raspberry Pi - no additional power supply for RPi Duplicated Raspberry Pi HDMI port Specification Power supply: 5Vdc +/-5% , 4A Ports & Connectors: DC jack - 5.5x2.5mm, USB socket - USB 3.0 type A, Power output connector - XH2.54 2-pin Power switch connector -PH2.0 4-pin PCB Size: 107.5mm x 85mm