Raspberry Pi Dual 2.5inch SATA HDD/SSD Storage Expansion Board,X883 Shield with USB 3-D Connector for Raspberry Pi 4 Model B

Overview This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/ssd storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The built-in LED light indicates the reading or writing status – no more guesswork again.   Note: Raspberry pi, 2.5" SATA SSDs/HDDs, power adapter are all not included Due to installation restrictions, please pay attention to the thickness of the hard drive As with all SSDs, new media must be formatted before use Older SSD drives with less efficient flash media may not perform as well as newer drives   Features Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield Supports dual 2.5 SATA HDDs/SSDs working at the same time Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying Function to power the RPI via XH2.54 only needing a single power supply Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac LED blue indicator indicates each drive status Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)   Power Supply Requirement Power supply: 5Vdc +/-5% , ≥4A Ports & Connectors: DC jack - 5.5x2.5mm Pls use high quality power adapter, or the HDD/SSD may cannot be recognized. Packing List 1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD) 1 x Carrier Board (To mount raspberry pi on X883) 1 x USB 3-D Connector 1 x 2-Pin Power Connection Wire 6 x Spacer F/F M2.5 x 14mm 2 x Spacer M/F M2.5 x 14+5mm 12 x Screw M2.5 x5mm 4 x Screw M3 x 6mm