Raspberry Pi X829 Dual 2.5" SATA HDD/SSD Shield + X735 Power Management Board for Raspberry Pi 4 Model B
NOTES Not include Raspberry Pi 4B . A microSD card is required for forceing the Raspbian OS to use the HDD/SSD for its "root" partition For use with original power supply unit only Do not power your Raspberry Pi via the Pi's 40-pin header and Type-C USB socket at the same time We do not recommend using Samsung hard drives,Please use hard drives of other brands X735 V2.5 board: You must install shell script to enable the PWM fan work fine since it's a PWM fan, refer toX735 V2.5 Software Overview: The X829 dual 2.5" SATA HDD expansion board, offering an easy and fast way to create bigger storage solution for your Raspberry Pi 4B. Its elegant and ultra-compact design allows two 2.5" HDD/SSD to be conveniently attached to Raspberry Pi 4. The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds. The mounting holes and standoffs help protect the hard disk drives, while effectively drawing the heat away from the drive for reliable performance. The built-in LED light indicates the reading or writing status – no more guesswork again. The X829 can be the perfect storage solution for your home media center and building Network-attached storage (NAS) for storing and streaming your own videos, music, and digital photos around the house and even across the world. WiKi: raspberrypiwiki.com/X829 raspberrypiwiki.com/X735 FOR USE WITH: Raspberry Pi 4 Model B Only Operating System: All Raspberry Pi operating systems KEY FEATURES: Ideal storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield Supports dual 2.5 SATA HDDs/SSDs working at the same time The 2.5'' SSD capacity is no limit，but SSD thickness is limited. Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying(see note1) Function to power the RPI via XH2.54 only needing a single power supply Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers Integrated USB 3.1 Gen 1 Hub Controller USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4 Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac(see note2) Specially-made USB3.1 jumper to connect with Raspberry Pi - no additional cables needed Ultra-compact design allows for ease of use two HDD/SSD with Raspberry Pi 4 LED blue indicator indicates each drive status Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt) SPECIFICATION: Power supply: 5.1Vdc +/-5% , ≥4A Ports & Connectors: DC jack - 5.5x2.5mm DC jack - 5.5x2.5mm USB socket - USB 3.0 type A Power connector - XH2.54 2-pin SATA socket - 7+15P Female PCB Size 107.5mm x 85mm Packing List: Bundle1：X829 Board +X735 1x X829 HDD/SSD expansion board 1x USB 3.0 Cable 1x 2-Pin Power Connection Wire 1x Power daughter board 7x Spacer F/F M2.5 x 15mm 1x Spacer M/F M2.5 x 11mm 11x Screw M2.5 x5mm 4x Screw M3 x 6m 1 x X735 Board 8 x Screw M2.5*6 4 x Spacer F/M M2.5*12+6 4 x Spacer F/F M2.5*12 Bundle2: Bundle1+ Power supply(EU) Bundle3: Bundle1+ Power supply(US) Bundle4: Bundle1+ Power supply(UK)