Raspberry Pi X872 NVMe M.2 2280 SATA SSD Shield/Expansion Board for Raspberry Pi 4 Model B
NOTES NOT INCLUDE raspberry pi board Additional spacer required for SSD lengths 2260, 2242 and 2230 (not supplied with X872) A microSD card is required for forcing the Raspbian OS to use the HDD/SSD for its "root" partition Only compatible with NVMe M.2 SSDs Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices As with all SSDs, new media must be formatted before use, please refer to Tutorial Initalize New SSD SSDs use exceptionally high performance storage media that will run hot when under load Older SSD drives with less efficient flash media may not perform as well as newer drives USB 3.0 devices might generate radio frequency interference that can cause Wi-Fi and other wireless devices operating in the 2.4GHz band to have issues communicating with your Raspberry Pi4. To avoid interference on the 2.4GHz band using Wi-Fi, try using the 5GHz band instead. If problem still exists, please turn off WiFi and use the wired network instead. Overview This is the X872 NVMe M.2 SSD Storage Expansion Board for Raspbeerry Pi 4 model B, it provides a complete storage solution for raspberry pi 4. It supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230. Features Ideal storage solution only for Raspberry Pi 4 - M.2 NVMe SSD Shield Supports up to 2TB M.2 NVMe SSD solid-state drives Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230,additional spacer required for SSD lengths 2260, 2242 and 2230 (not supplied with X872) Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying (see FAQ 1) USB3.1 Gen1 5Gb/s connectivity offers plug-and-play functionality on your Raspberry Pi 4 Ultra-fast Data Transfers from a PC or a Mac (USB3.1 Gen2 10Gb/s, Gen1 5Gb/s, USB2.0 480Mb/s) Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller Integrated high efficiency step-Down Converter, 3.3V max3.5A to power the SSD External self-powered or USB bus-powered Onboard DC 55x25 jack & XH2.54 connector for extra SSD power supply LED red indicator indicates powered status and blue indicator indicates drive status Specially-made USB3.1 jumper to connect with Raspberry Pi - no cabling required! Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi Fully compatible with X710 for wide input voltage (6~36V) and intelligent power management Fully compatible with X765 for powering over Ethernet (POE, 5V 5A) Fully compatible with X725 for uninterruptible power supply (18650 UPS, 5.1V 8A, WOL) SPECIFICATION Power Supply 5Vdc +/-5% , Powered by Raspberry Pi USB port 5Vdc via DC power jack or XH2.5 connector, Extra power for the SSD Ports & Connectors 1x USB A socket 1x DC power jack 5.5*2.5mm 1x XH2.54 power connector 1x 67Pin M.2 connector P=0.5mm, H3.2mm, Key M PCB Size 87mm x 56mm Packing List Bundle1： Bundle2 + Case Bundle2： 1 x X872 M.2 NVME SSD shield (Not include the NVMe SSD) 1 x USB3.1 jumper / Connector 4 x Spacer M/F M2.5 x 12mm 4 x Spacer F/F M2.5 x 8mm 4 x Screw M2.5 x 6mm 1 x SSD Screw driver 1 x Screw M2 *4mm