SIM7600CE-CNSE 4G HAT for Raspberry Pi Supports 4G / 3G / 2G Communication, Also LBS Positioning Custom PCB power board pcba

  Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian. SIM7600CE-CNSE 4G HAT For Raspberry Pi, Supports 4G / 3G / 2G Communication, Also LBS Positioning For different regions, we provide multiple LTE Cat-4/Cat-1 HATs to choose from: SIM7600A-H 4G HAT: mainly applicable in North America (US, CA) SIM7600E-H 4G HAT, SIM7600E LTE Cat-1 HAT: mainly applicable in Europe, Southeast Asia, West Asia, Africa, China, North Korea SIM7600SA-H 4G HAT: mainly applicable in Australia, New Zealand, Taiwan, Latin America SIM7600CE 4G HAT, SIM7600CE-CNSE 4G HAT: mainly applicable in China, and some Southeast Asia countries SIM7600G-H 4G HAT: the global version Please check the supported bands according to your local service provider, select the proper one when placing order. 4G HAT FOR RASPBERRY PI Enabling 4G / 3G / 2G Communication & LBS Positioning Based on SIM7600CE-CNSE   Features At A Glance Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports LBS base station positioning Onboard USB interface, for testing AT Commands, establishing network connection, and so on Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Ard/STM32 SIM card slot, supports 1.8V/3V SIM card TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making telephone call 2x LED indicators, easy to monitor the working status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps) Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Ard/STM32) Specifications FREQUENCY BAND LTE Cat-4 LTE-FDD: B1/B3/B5/B8 LTE-TDD: B38/B39/B40/B41 3G UMTS/HSDPA/HSPA+: B1/B8 2G GSM/GPRS/EDGE: 900/1800 MHz SMS AND AUDIO SMS Supported types: MT, MO, CB, Text, PDU Storage: USIM card and ME (default) Audio feature Supports echo cancellation Supports noise reduction OTHERS Power supply 5V Operating voltage 5V / 3.3V (configured via jumper) Operating temperature -30°C ~ 80°C Storage temperature -45°C ~ 90°C Dimensions 56.01mm × 65.00mm Standard Raspberry Pi 40PIN GPIO Compatible With Raspberry Pi Series Boards, Jetson Nano Dial-Up On Windows/Linux LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink) * 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) * * stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc. Cloud Communication Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS Telephoto Call & SMS Support Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack What's On Board SIM7600CE-CNSE CP2102 USB to UART converter NAU8810 audio decoder TXS0108EPWR voltage translator translates 3.3V/5V into 1.8V MP2128DT power chip MP1482 power chip Raspberry Pi GPIO header for connecting with Raspberry Pi SIM7600 control interface for connecting with host boards like Ard/STM32 SIM card slot supports 1.8V/3V SIM card TF card slot for storing data like files, messages, etc. 3.5mm earphone/mic jack for audio actions like making telephoto call USB interface for testing AT Commands, and so on USB TO UART interface for serial debugging, or login to Raspberry Pi   MAIN antenna connector Module power switch Network status indicator Power indicator UART selection jumper A: access Raspberry Pi via USB to UART B: control the SIM7600 by Raspberry Pi C: control the SIM7600 via USB to UART PWR selection jumper PWR - 3V3: auto startup on power-up PWR - D6: startup/shutdown by the Raspberry Pi D6 pin Flight mode selection jumper NC by default, no flight mode control pin Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin Operating voltage selection jumper VCCIO - 3.3V: set operating voltage as 3.3V VCCIO - 5V: set operating voltage as 5V USB connector solder pads BOOT forced programming solder pads Pinout Definition Outline Dimensions   Selection Guide   SIM7600CE-CNSE SIM7600CE-T SIM7600E SIM7600E-H SIM7600A-H SIM7600G-H Applicable regions China Europe/Southeast Asia/West Asia/Africa/China/South Korea North America Global Band LTE Cat-4 /LTE Cat-1 LTE-TDD B38/B39/B40/B41 LTE-FDD B1/B3/B5/B8 LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41 LTE-FDD B2/B4/B12 LTE-TDD B34/B38 /B39/B40/B41 LTE-FDD B1/B2/B3/B4/B5/B7 /B8/B12/B13/B18/B19 /B20/B25/B26/B28/B66 3G UMTS/HSDPA/HSPA+ B1/B8 TD-SCDMA B34/B39 UMTS/HSPA+ B1/B5/B8 UMTS/HSPA+ B2/B5 UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 2G GSM/GPRS/EDGE 900/1800 MHz N/A GSM/GPRS/EDGE 850/900/1800/1900MHz GNSS N/A GPS/Beidou/GLONASS Data Rate LTE Cat-4 150Mbps(DL)/50Mbps(UL) N/A 150Mbps(DL)/50Mbps(UL) LTE Cat-1 N/A 10Mbps(DL) /5Mbps(UL) N/A 3G (HSPA+) 42Mbps(DL)/5.76Mbps(UL) 2G (EDGE) 236.8Kbps(DL)/236.8Kbps(UL) N/A 236.8Kbps(DL)/236.8Kbps(UL) 2G (GPRS) 85.6Kbps(DL)/85.6Kbps(UL) N/A 85.6Kbps(DL)/85.6Kbps(UL) Software Features Network protocol TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/DNS Dial-up protocol PPP/NDIS/RNDIS USB driver Windows XP/7/8/10, Linux (driver free for Raspbian) Hardware Interfaces SIM card slot Compatible with 1.8V and 3V SIM card UART Supports AT commands through UART, compatible with 3.3V/5V operating voltage USB port Supports AT commands testing, GPS positioning, firmware upgrading, etc. USB to UART Supports serial debugging, or login to Raspberry Pi Audio jack Supports audio actions like making telephoto call TF card slot Yes, for storing data like files, messages, etc. N/A Yes Antenna connector LTE main antenna LTE main antenna + LTE diversity antenna + GNSS antenna Applications Examples Healthcare, smart payment, Internet talk, environmental monitoring, energy monitoring, fleet management, smart industry, intelligent agriculture, etc.   PACKAGE CONTENT Weight: 0.187 kg SIM7600CE-CNSE 4G HAT x1 LTE Antenna x1 USB-A to Micro-B cable x2 RPi screws pack (2pcs) x1 1 2 3 4